65VQT1P09Advanced (Recording pictures)For details on [REC] mode menu settings, refer to P18.Using one of these modes, jitter during picture taking is detected, and the camera automaticallycompensates the jitter, enabling jitter-free images to be taken.Applicable modes: ñ·¿nNote• The stabilizer function may not be effective in the following cases.– When there is a lot of jitter.– When the zoom magnification is high.– In digital zoom range.– When taking pictures while following a moving subject.– When the shutter speed becomes slower to take pictures indoors or in dark places.Be careful of camera jitter when you press the shutter button.• The setting is fixed to [MODE2] with [SELF PORTRAIT] in scene mode and to [OFF] in[STARRY SKY] in scene mode.• It cannot be set to [OFF] in the Intelligent auto mode.• In motion picture mode, [MODE2] cannot be set.For details on [REC] mode menu settings, refer to P18.You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also, youcan set it faster to reduce the blur of the subject.Applicable modes: ·[1/250], [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]Note• This should usually be set to [1/8 ] to take pictures. (When you select a minimum shutter speedother than [1/8 ], [ ] appears on the screen.)• Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so werecommend using a tripod and the self-timer for taking pictures.• Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommendrecording the picture in well-lit area. If correct exposure cannot be achieved, [ ] will flash inred when the shutter button is pressed halfway.[STABILIZER][OFF][MODE1]: Jitter is always compensated during [REC] mode.[MODE2]: The jitter is compensated for when the shutter button is pressed.[MIN. SHTR SPEED]Minimum shutter speed setting 1/250– 1 –Brightness Darker BrighterJitter Less More