77VQT1P09Advanced (Playback)You can add text (comments) to pictures. After text has been registered, it can be included inprints using [TEXT STAMP] (P78). (Only alphabetic characters and symbols can be entered.)Select [TITLE EDIT] on the [PLAYBACK] mode menu. (P18)Press 3/4 to select [SINGLE] or [MULTI] and thenpress [MENU/SET].Press 3/4/2/1 to select text and then press[MENU/SET] to register.• Press [DISPLAY] to switch text between [A] (capitals), [a] (smallcase) and [&/1] (special characters and numbers).• The cursor at the entry position can be moved to the left with[L], and to the right with [Z].• To enter a blank, move the cursor to [SPACE] or to delete an entered character, movethe cursor to [DELETE], and press [MENU/SET].• To stop editing at any time during text entry, press [‚].• A maximum of 30 characters can be entered.Press 3/4/2/1 to move the cursor to [EXIT] and then press [MENU/SET] to end text input.Press [‚] to return to the menu screen.¢¢ The menu screen is automatically restored when [MULTI] is selected.• Press [MENU/SET] to close the menu.∫ Delete the title (for [SINGLE] only)1 In step 4 when [SINGLE] (P77) is selected, delete all the texts, select [EXIT], andpress [MENU/SET].2 Press [‚].3 Press [MENU/SET] to close the menu.[TITLE EDIT]Select the picture, and thenpress [MENU/SET] to set.• [’] A is displayed for pictures thathave already been recorded with textin [BABY1]/[BABY2] or [PET] namesettings in scene mode or [TITLEEDIT].[MULTI] settingPress [DISPLAY] to set (repeat),and then press [MENU/SET] to set.[SINGLE] [MULTI]Press 2/1 toselect the picture.Press 3/4/2/1 toselect the pictures.• The setting is canceled when [DISPLAY] is pressed again.• Titles cannot be changed or deleted in [MULTI].123A456
