VQT1P0994Connecting to other equipmentPlaying Back Pictures on a TV ScreenPreparations:Set the [TV ASPECT]. (P23)Turn this unit and the TV off.1 Yellow: to the video input socket2 White: to the audio input socketA Align the marks, and insert.B AV cable (supplied)• Check the directions of the connectors, and plug them straight in or unplug them straight out.(Otherwise the connectors may be bent out of shape which will cause trouble.)Connect the AV cable B (supplied) to the video input and the audioinput sockets on the TV.Connect the AV cable to the [AV OUT] socket on the camera.Turn the TV on and select external input.Turn the camera on.Note• Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom orthe left and right of the pictures.• Do not use any other AV cables except the supplied one.• Read the operating instructions for the TV.• When you play back a picture vertically, it may be blurry.• You can view pictures on TVs in other countries (regions) which use the NTSC or PAL systemwhen you set [VIDEO OUT] in the [SETUP] menu.• Even if you set [VIDEO OUT] to [PAL], the output signal will still be NTSC in the recording mode.Still pictures recorded on an SD Memory Card can be played back on a TV with an SD MemoryCard slot.Note• Depending on the TV model, pictures may not be displayed on the full screen.• Motion pictures cannot be played back. To play back motion pictures, connect the camera to theTV with the AV cable (supplied).Playing back pictures using the AV cable (supplied)Playing back pictures on a TV with an SD Memory Card slotDC IN AV OUT/DIGITAL COMPONENTOUTB12A1234
