Panasonic Lumix DMC-FZ20 Operating Instructions Manual

Contents

Connecting to a PC or Printer97∫ When using Windows 98/98 SEWhen using Windows 98/98 SE, install the USB driver before connecting. (When usingWindows Me/2000/XP, Mac OS 9.x and Mac OS X, you do not have to install the USBdriver.)∫ When using Windows 2000 Professional, Windows Me, Windows 98/98 SE or MacOS 9.xEven if the [PictBridge (PTP)] is selected in [USB MODE], the camera cannot beconnected by a PC with the following OS’s: Windows 2000 Professional, Windows Me,Windows 98/98 SE or Mac OS 9.x.• When connecting the camera to a PC, do not set [USB MODE] to [PictBridge (PTP)].(When the camera is shipped, [PC] is selected.)• When connecting to a PC which includes the above-mentioned OSand setting the [USB MODE] to [PictBridge (PTP)], the messagesshown on the right appear on the LCD monitor of the camera.The following messages appear for each OS on the display of thePC. Select [Cancel] to close the window and disconnect the USBconnection cable.USB MODEPictBridge(PTP)OS MessageWindows 2000 Professional [Welcome to the Found New Hardware Wizard]Windows MeWindows 98/98 SE[New Hardware Found]>[Add New Hardware Wizard](When you connect to the PC more than 2 times, only[Add New Hardware Wizard] appears.)Mac OS 9.x [Software needed for the USB device “DMC-FZ20” is notavailable. Would you like to look for the software on theInternet?]