Advanced-Shooting58 VQT1X05& [BURST]For details on [REC] menu settings, refer to P18.When you press and hold the shutter button several pictures are taken in succession.Applicable modes: 4 1 5[OFF] & #Burst speed(pictures/second) — 3¼ Approx. 2Number ofrecordablepicturesh — Max. 4 Depends on the remainingcapacity of the built-inmemory/card.8 — Max. 7¼ The burst speed is constant regardless of the transfer speed of the card.• The burst speed values given above apply when the shutter speed is 1/60 or faster and whenthe flash is not activated.Note• When the burst mode setting is set to [#]– The burst speed becomes slower halfway. The exact timing of this depends on the type ofcard, the picture size and the quality.– You can take pictures until the capacity of the built-in memory or the card is full.• The focus is fi xed when the first picture is taken.• When the burst speed is set to [&], the exposure and white balance are fixed at the settingsused for the first picture for the subsequent pictures as well. When the burst speed is set to [#],they are adjusted each time you take a picture.• When the self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3.• If you are following a moving subject while taking pictures in a place (landscape) indoors,outdoors etc. where there is a large difference between the light and shade, it may take timeuntil the exposure is stable. If burst is used at this time, the exposure may not become optimal.• The burst speed (pictures/second) may become slower depending on the recordingenvironment such as in dark places, if the ISO sensitivity is high etc.• Burst Mode is not canceled when the camera is switched off.• If you take pictures in Burst Mode with the built-in memory, it will take time to write the picturedata.• In Burst Mode, the flash setting is fi xed to Forced flash OFF [o].• Burst Mode cannot be used [HIGH-SPEED BURST] and [STARRY SKY] in [SCENE MODE].' [DIGITAL ZOOM]For details on [REC] menu settings, refer to P18.This can enlarge subjects even more than the optical zoom or extended optical zoom.Applicable modes: 1 5 6[OFF]/[ON]Note• Refer to P30 for details.• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] isset to [AUTO] or [MODE1].• You cannot use digital zoom when ISO sensitivity is at [i.AUTO].