Connecting to other equipment75VQT1X05Connecting to a PCYou can acquire recorded pictures to a PC by connecting the camera and the PC.• You can easily print out or mail the pictures you have imported. Use of the“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient wayof doing this.• Read the separate operating instructions for the supplied software for more informationabout the software in the CD-ROM (supplied) and how to install it.Preparations:Turn on the camera and the PC.Remove the card before using the pictures in the built-in memory.1 Connect the camera to a PC via the USB connection cable A (supplied).• Do not use any other USB connection cables except the supplied one.ABAV OUT/DIGITALA USB connection cable (supplied)• Check the directions of the connectors, and plug them straight in or unplug them straightout. (Otherwise the connectors may be bent out of shape which will cause trouble.)B Align the marks, and insert.• Use batteries with suffi cient battery power or the AC adaptor (optional: P103) and DCcoupler (optional: P103). If the remaining battery power becomes low while the cameraand the PC are communicating, the status indicator blinks and the alarm beeps.Refer to “Disconnecting the USB connection cable safely” (P76) before disconnectingthe USB connection cable. Otherwise, data may be destroyed.• Always use a genuine Panasonic AC adaptor (DMW-AC6PP: optional) and DC coupler(DMW-DCC2: optional).SELECT SETUSB MODEPLEASE SELECTTHE USB MODEACCESS2 Press e/r to select [PC], andthen press [MENU/SET].3 Double-click on [RemovableDisk] in [My Computer].• When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”,“NO_NAME” or “Untitled” is displayed.)