Advanced-Viewing67VQT1X05[MULTI] setting1 In step 4, delete all the texts, select [EXIT], and press [MENU/SET].2 Press [MENU/SET] to close the menu.Note• Text can be scrolled if all of the registered text does not fit on the screen.• The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode or [TRAVEL DATE]location setting can also be registered by using the operation in steps 4 and following.• The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [TRAVEL DATE]location setting and [TITLE EDIT] cannot be registered at the same time.• You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software onthe CD-ROM (supplied).• You can set up to 50 pictures at one time with [MULTI].• You cannot use [TITLE EDIT] for motion pictures, pictures protected and pictures takenwith other equipment.s [TEXT STAMP]You can stamp the recording date/time, age, travel date or title onto the recorded pictures.It is suitable for regular size printing. (Pictures larger than 3M will be resized whenstamping the date etc. on them.)1 Select [TEXT STAMP] on the [PLAYBACK] menu. (P18)2 Press e/r to select [SINGLE] or [MULTI] andpress [MENU/SET].[SINGLE] [MULTI]Press w/q toselect the picture.Press e/r/w/q toselect the pictures.A3 Select the picture, and thenpress [MENU/SET] to set.• [d] A appears on the screen ifthe picture have added the textstamp.For [MULTI] settingPress [DISPLAY] to set (repeat),and then press [MENU/SET].• The setting is canceled when[DISPLAY] is pressed again.4 Press e/r/w/q to select [SHOOTING DATE], [AGE], [TRAVEL DATE]or [TITLE], and then press [MENU/SET] to set each item.[SHOOTING DATE][W/O TIME]: Stamp the year, month and date.[WITH TIME]: Stamp the year, month, day, hour and minutes.[AGE] (P45)If this is set to [ON], [AGE] is stamped on the pictures.[TRAVEL DATE]If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.