Panasonic Lumix DMC-ZR3 Operating Instructions Manual

Also see for DMC-ZR3A: Brochure

Contents

- 155 -Connecting to other equipmentUsing a drag-and-drop operation, move the pictures you want toacquire or the folder storing those pictures to any different folder onthe PC. Disconnecting the USB connection cable safely• Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of thePC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor ofthe digital camera before removing the hardware.Note• This unit cannot stand upright when the AC adaptor is connected. When placing it on a surfaceand operating it, we recommend placing it on a soft cloth.• Turn the camera off before connecting or disconnecting the AC adaptor (optional).• Before inserting or removing a card, turn the camera off and disconnect the USB connectioncable. Otherwise, data may be destroyed.• If the camera is connected in Clipboard Mode, the built-in memory data is displayed even if acard is inserted.Press / to select [PC], and then press [MENU/SET].• If [USB MODE] (P28) is set to [PC] in the [SETUP] menu inadvance, the camera will be automatically connected to the PCwithout displaying the [USB MODE] selection screen. Since thereis no need to set this each time you connect to the PC, it isconvenient.• When the camera has been connected to the PC with[USB MODE] set to [PictBridge(PTP)], a message may appearon the PC’s screen. Select [Cancel] to close the screen, anddisconnect the camera from the PC. Then set [USB MODE] to[PC] again.Double-click on [Removable Disk] in [My Computer].• When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME”or “Untitled” is displayed.)Double-click [DCIM] folder.USB MODEPLEASE SELECTTHE USB MODEPictBridge(PTP)PCSELECT SET