Panasonic Lumix DMC-ZR3 Operating Instructions Manual

Also see for DMC-ZR3A: Brochure

Contents

Others- 182 - Disconnect the USB connection cable. Connect it again while the card is inserted in thecamera.• When the mode dial is set to [¨], contents of the built-in memory will be displayed. Set the mode dial to anything except [¨]. Check if your PC is compatible with SDXC memory cards.http://panasonic.net/avc/sdcard/information/SDXC.html A message prompting to format the card may be displayed when connecting, but do notformat. If the [ACCESS] displayed on the LCD monitor does not disappear, disconnect the USBconnection cable after turning off the power.• Pictures cannot be printed using a printer which does not support PictBridge. Set to [PictBridge(PTP)] in [USB MODE]. (P28, 157) When using a printer with a Cropping or borderless printing function, cancel this functionbefore printing. (For details, refer to he operating instructions for the printer.) When you order photo studios to print pictures, ask the photo studio if the pictures can beprinted with both ends. Press [MENU/SET], select the [SETUP] menu icon [ ] and then select the [~] icon to setthe desired language. (P30)• In dark places, the AF Assist Lamp (P111) lights red to make it easier to focus on a subject.• Is [AF ASSIST LAMP] on the [REC] Mode menu set to [ON]? (P111)• The AF Assist Lamp does not turn on in bright places.• The surface of the camera may become warm during use. This does not affect he performanceor quality of the camera.• When the brightness changes due to zoom or camera movement etc., the lens may click andthe picture on the screen may drastically change. However, the picture is not affected. Thesound is caused by the automatic adjustment of the aperture. This is not a malfunction.The card is not recognized by the PC. (The built-in memory is recognized.)The card is not recognized by the PC. (SDXC memory card is used)The picture cannot be printed when the camera is connected to a printer.The ends of the pictures are cut at printing.OthersAn unreadable language was selected by mistake.A red lamp sometimes turns on when the shutter button is pressed halfway.The AF Assist Lamp does not turn on.The camera becomes warm.The lens clicks.