VQT2R20 111Zoom MarkUseful for enlarging and saving parts of maps, etc.■ To register zoom enlarged size and positionEnlarge withzoom lever andselect positionwith ▲▼◄►Press • To change zoom andposition: Perform stepsand• To finish Zoom Mark setting:Restore zoom to original(1 x) ratioZoom MarkDisplayed on registered pictures■ To view registered ratio and position:Display picturewithTurn to T side(No need to manuallyenlarge or move)Zoom leverImmediately displayed atregistered ratio and position• To cancelZoom Mark→ [CANCELMARK](below)●When a picture with a Zoom Mark is deleted, both the original picture and picture withZoom Mark will be deleted.●Picture can be deleted even while zoomed in.[CLIPBOARD] menuA special menu is used in [CLIPBOARD] Mode.[REC ON CLIPBOARD] menu (REC/PLAY switch: Mode dial: )[PICTURE SIZE] [2 M] (Priority to picture quality) / [1 M] (Priority to the number of pictures)[AUDIO REC.] Record sound (5 seconds) simultaneously. [OFF] / [ON][LCD MODE] [OFF] / [AUTO POWER LCD] / [POWER LCD] (→23)[CLOCK SET] (→22)[PLAY ON CLIPBOARD] menu (REC/PLAY switch: Mode dial: )[CANCELMARK] Select marked clipboard picture with ◄►.Cancel with [MENU/SET].[COPY]Copy single pictures from clipboard to card. (Zoom Mark will not be copied.)Select clipboard picture with ◄► and press [MENU/SET].Select [YES] with ▲▼ and press [MENU/SET].[LCD MODE] [OFF] / [POWER LCD] (→23).●Other items on the [SETUP] menu will reflect settings made in the [PROGRAM AE]Mode, etc.
