VQT2R20 19Setting the Clock ( The Clock is not set when thecamera is shipped.)Turn on the powerThe power is turned on.If the language select screen is notdisplayed, proceed to step .Press [MENU/SET] while themessage is displayedPress ▲▼ to select the language,and press [MENU/SET]• The [PLEASE SET THE CLOCK] messageappears. (This message does not appear inPlayback Mode.)Press [MENU/SET]Press ◄► to select the items(year, month, day, hour, minute,display order or time displayformat), and press ▲▼ to setSelect thesettingitemSelect either [24HRS] or [AM/PM] for the time display format.Select the display order for theday, month, and year ([M/D/Y],[D/M/Y], or [Y/M/D]).Changethe valuesandsettings• To cancel → Press .• When set to [AM/PM], 0:00 midnight is AM 12:00,and 0:00 noon is PM 12:00.Press [MENU/SET]Confirm the setting and press[MENU/SET]• To return to the previous screen, press .Turn on the power again and check the time display.(Time and date can be displayed bypressing [DISPLAY] several times.)Set REC/PLAY switch to before turning on the power.REC/PLAY switchTo change time settingSelect [CLOCK SET] from the[SETUP] menu (→22), performand .• Clock settings will be saved forapprox. 3 months even afterbattery is removed, provideda fully-charged battery wasinstalled in the camera for 24hours beforehand.■To set local time at traveldestination[WORLD TIME] (→93)●Failure to set the date and time will cause the date/time to be improperly printed when printingpictures at a digital photo center or when using [TEXT STAMP].●Year can be set between 2000 and 2099.●After the time has been set, the date can be printed correctly even if the date is not displayed on thecamera screen.For the operating procedures for the DMC-ZS7 (→17)
