VQT2R20 117Splitting up motion picturesPlayback Mode:A single motion picture can be split into 2 parts. This is convenient when you want to keepjust the necessary scenes, or if you wish to delete unnecessary scenes to increase freespace on your card, such as when traveling.Select [VIDEO DIVIDE] from [PLAYBACK] menu (→20)Select the motion picture to split with ◄►, and then press[MENU/SET]Play back the motion picture and pause at the place to split▲: Pause / playback◄: Fast rewind (2 steps)(during pause) single-frame rewind►: Fast forward (2 steps)(during pause) single-frame forwardDecide the point to split the motion pictureSelect [YES] The motion picture is split.• The original motion picture that was splitdoes not remain.(There will only be the 2 motion pictures that werecreated after the split.)• Splitting may take some time.• After setting, press to return to the menu screen.●Use a sufficiently charged battery (→11) or AC adaptor (optional) and DC coupler(optional).●When there is extremely little free space left on the card, it may not be possible to splitthe motion picture.●The following motion pictures cannot be split.• Motion pictures set as [FAVORITE]• Motion pictures protected by [PROTECT]●Splits cannot be made that would leave a motion picture of less than 1 second after the split.●Split points are set at time increments of 0.5 seconds. (There may be a slight differencefrom the specified point)●During splitting, do not turn off the camera’s power or remove the card or battery. If youdo so, the motion picture will be deleted.●It may not be possible to split motion pictures that were recorded with a different camera.●[PRINT SET] is canceled after splitting.[VIDEO DIVIDE] is not available in the DMC-ZS6/DMC-ZS5.
