VQT2R20 161TV, computer, printer (continued)VIERA Link (HDMI) is not working.●Is the HDMI mini cable (optional) connected correctly? (→148)→ Check that the HDMI mini cable (optional) is fully inserted.●Is the camera’s [VIERA Link] setting set to [ON]? (→27)→ The input setting may not be able to be changed automatically with certain television HDMIsockets. In this case, please change the input setting with your television’s remote control(consult your television’s operating instructions for details).→ Check the VIERA Link (HDMI) settings on the device you are connecting to.→ Turn the camera’s power off and on again.→ Turn the ‘VIERA Link control (HDMI device control)’ setting on your television (VIERA) to ‘off’, andthen to ‘on’ again. (Consult your VIERA’s operating instructions for details.)Cannot send pictures to computer.●Not connected correctly (→141).●Check whether computer has recognized camera.●Set [USB MODE] to [PC] (→26).Computer does not recognize card (only reads built-in memory).●Disconnect USB connection cable and reconnect with card in place.●Set mode dial to any except .Computer does not recognize card. (When using an SDXC memory card)→ Check whether your computer is compatible with SDXC memory cards.http://panasonic.net/avc/sdcard/information/SDXC.html→ A message prompting you to format the card may appear when you connect it. Do not format thecard.→ If the [ACCESS] indicator on the LCD monitor does not go off, turn off the camera’s power beforedisconnecting the USB connection cable.I want to play computer pictures on my camera.●Use the supplied software ‘PHOTOfunSTUDIO’ to copy pictures from computer to camera.●To save to clipboard, use software to copy from computer to card, then copy to clipboard folder with[COPY] (→137) in [PLAYBACK] menu.Cannot print when connecting to printer.●Printer not compatible with PictBridge.●Set [USB MODE] to [PictBridge (PTP)] (→26).Cannot get the date printing.●Make date printing settings before printing.→ In shop: Make [PRINT SET] settings (→134), and request printing ‘with dates’.→ With printer: Make [PRINT SET] settings, and use a printer compatible with date printing.→ With supplied software: Select ‘with dates’ within print settings.●Use [TEXT STAMP] before printing (→128).Edges cut off pictures when printing.●Release any trimming or edgeless printing settings on printer before printing.(Consult printer operating manual.)●The pictures were recorded in aspect ratio.→ If printing in shop, check if 16:9 sizes can be printed.
