Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Also see for Lumix DMC-ZS5: Basic operating instructions Operating instructions Operating instructions Operating instructions for advanced features Operating instructions

Contents

24 VQT2R20 VQT2R20 25For details about the setting procedure in the [SETUP] menu (→20)Using the [SETUP] menu (Continued)[REC AREA]Enables verification ofthe recordable area fora motion picture beforerecording.[OFF]/[ON]• Recordable area displayed for motionpictures should be interpreted as aGuideline.• When using Extended Optical Zoom,the recordable area may not always bedisplayed for certain zoom ratios.• This setting cannot be used with IntelligentAuto Mode.This section is notrecorded.[ECONOMY]Turn off the power ormake the LCD monitorgo dark while not usingthe camera to minimizebattery consumption.[SLEEP MODE][OFF]/[2 MIN.]/[5 MIN.]/[10 MIN.]:Automatically shut off power while not in use.• To restore → Press the shutter button halfway, or turn onthe power again.• Cannot be used in the following cases:When using AC adaptor (optional) and DC coupler(optional), when connected to computer/printer, duringmotion picture recording/playback, during Slide Shows,during automatic demo playback• Settings fixed to [5 MIN.] in [INTELLIGENT AUTO] Modeor [CLIPBOARD] Mode, or [10 MIN.] while Slide Show ispaused.[LCD POWER SAVE][OFF]/[ON]:The LCD monitor goes dark to minimize powerconsumption.• Reduces the picture quality of the LCD monitor displayduring recording to minimize battery consumption(except for the Digital Zoom area). Note, however, thatthere is no effect on the recorded picture.• When [LCD MODE] is set, the brightness of the LCDmonitor follows the setting in [LCD MODE], but thepicture quality of the LCD monitor stays at a low level.Item Settings, notesFor details about the setting procedure in the [SETUP] menu (→20)[AUTO REVIEW]Automatically displaystill pictures immediatelyafter taking them.[OFF]: No auto review[1 SEC.]/[2 SEC.]: Automatically display for 1 or 2seconds.[HOLD]: Auto review screen remains until a button (otherthan the [DISPLAY] button) is pressed• Fixed to [2 SEC.] in [INTELLIGENT AUTO] Mode.• In [SELF PORTRAIT], [PANORAMA ASSIST], [HI-SPEED BURST], [FLASH BURST], and [PHOTOFRAME] Scene Modes, [AUTO BRACKET], [MULTIASPECT], [BURST] Mode, or still pictures with audio,Auto Review performed regardless of setting.• Motion pictures cannot be automatically reviewed.[ZOOM RESUME]Remember the zoomposition when turning thepower off.[OFF]/[ON]• Cannot be set when using [SELF PORTRAIT] SceneMode.[NO.RESET]Reset picture filenumbers.[YES]/[NO]• The folder number is updated and the file number startsfrom 0001.• A folder number between 100 and 999 can be assigned.Numbers cannot be reset once folder number reaches999. In this case, save all necessary pictures to yourcomputer, and format the built-in memory/card (→28).• To reset folder number to 100:First, format the built-in memory or card, and reset thefile numbers using [NO.RESET]. Then, select [YES] onthe folder number reset screen.• File numbers and folder numbers. (→142)Item Settings, notes[REC AREA] is not available in the DMC-ZS6/DMC-ZS5.