Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Also see for Lumix DMC-ZS5: Basic operating instructions Operating instructions Operating instructions Operating instructions for advanced features Operating instructions

Contents

16 VQT2R20 VQT2R20 17Inserting and removing the card (optional)/the battery (Continued) Setting the Clock ( The Clock is not set when thecamera is shipped.)Remaining battery and memory capacityPictures remaining ( →174, →176)Displayed when no card is inserted (pictures will be saved to built-inmemory)Remaining battery (only when using battery)(flashes red)If the battery mark flashes red, recharge or replace battery. (→11)When in operation(Card) or (Built-in memory) are illuminated red.While the light remains lit, an operation is taking place, such as picture writing, reading,deletion or formatting. While the light is lit, do not turn off the power or remove battery,card, AC adaptor (optional) or DC coupler (optional) (this can cause data loss ordamage). Do not subject the camera to vibrations, impact, or static electricity. Shouldany of these cause camera operation to be terminated, attempt to perform the operationagain.Picture save destination (cards and built-in memory)Pictures will be saved to a card if one is inserted, or to the built-in memory if not.■ Built-in memory (approx. 15 MB , approx. 40 MB )●Pictures may be copied between cards and the built-in memory (→137).●The access time for the built-in memory may be longer than the access time for a card.●Clipboard pictures (→110) are saved to built-in memory.●[QVGA] in [REC QUALITY] can only be available to record motion pictures in the built-in memory.■ Compatible memory cards (optional)The following SD standard-based cards (Panasonic brand recommended)Type of Card Capacity NotesSD memorycards8 MB – 2 GB • Can be used with devices compatible with the respectiveformats.• Before using SDXC memory cards, check your computerand other devices support this type of card.http://panasonic.net/avc/sdcard/information/SDXC.html• Cards in capacities not listed at left are not supported.SDHC memorycards4 GB - 32 GBSDXC memorycards48 GB - 64 GB●Please reformat the card with this camera if it has already been formatted with acomputer or another device. (→28)●If the write-protect switch is set to ‘LOCK’, the card cannot be used torecord or delete pictures, and it cannot be formatted.●It is recommended that you copy important pictures to your computer (aselectromagnetic waves, static electricity, or faults may cause data to be damaged).●Latest information:http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)Turn on the powerThe power is turned on.If the language select screen is notdisplayed, proceed to step .Press [MENU/SET] while themessage is displayedPress ▲▼ to select the language,and press [MENU/SET]• The [PLEASE SET THE CLOCK] messageappears. (This message does not appear inPlayback Mode.)Press [MENU/SET]Press ◄► to select the items(year, month, day, hour, minute,display order or time displayformat), and press ▲▼ to setSelect thesettingitemSelect either [24HRS] or [AM/PM] for the time display format.Select the display order for theday, month, and year ([M/D/Y],[D/M/Y], or [Y/M/D]).Changethe valuesandsettings• To cancel → Press .• When set to [AM/PM], 0:00 midnight is AM 12:00,and 0:00 noon is PM 12:00.Press [MENU/SET]Press [MENU/SET]• To return to the previous screen, press .Set REC/PLAY switch to before turning on the power.REC/PLAY switchSwitch(LOCK)(Continued on the next page)For the operating procedures for the DMC-ZS6/DMC-ZS5 (→19)