Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Also see for Lumix DMC-ZS5: Basic operating instructions Operating instructions Operating instructions Operating instructions for advanced features Operating instructions

Contents

136 VQT2R20 VQT2R20 137Using the [PLAYBACK] menu (Continued)Playback Mode: (Set mode dial to any except )For the [PLAYBACK] menu setting procedure (→20).[COPY]You can copy pictures between built-in memory and memory card.Set-up: Press [MENU/SET] → [PLAYBACK] menu → Select [COPY]Select the copy method (direction): Copy all pictures from built-in memory to card(go to step ).(Clipboard pictures cannot be copied. Use[COPY] in the [CLIPBOARD] menu (→111).): Copy 1 picture at a time from card to built-inmemory.: Copy 1 picture at a time from card to clipboardfolder (in built-in memory) (not motion pictures).Select picture with ◄ ► and press [MENU/SET] (for and)Select [YES]• To cancel → Press [MENU/SET].• After confirmation, press to return to the menuscreen.• After all the pictures are copied from the built-inmemory to the memory card, the display returnsautomatically to the playback screen.(Screen shown is example)●If there is not enough space on the built-in memory for copying to be performed, turnoff the power, remove the card, and delete pictures from the built-in memory (to deleteclipboard pictures, set the mode dial to Clipboard Mode).●Copying of picture data from the built-in memory to memory cards will be terminatedmidway if there is insufficient space on the card. Using memory cards with highercapacities than the built-in memory (approx. 15 MB , approx. 40 MB ) isrecommended.●Copying pictures may take several minutes. Do not turn off power or perform otheroperations during copying.●If identical names (folder/file numbers) are present in the copy destination, a newfolder for copying will be created when copying from built-in memory to card ( ).Identically-named files will not be copied from card to built-in memory ( ).●The print settings and protection settings are not copied. Set them again after copying.●Only pictures from Panasonic digital cameras (LUMIX) may be copied.●Original pictures will not be deleted after copying (to delete pictures (→45)).●This setting can only be made when the Playback Mode is in [NORMAL PLAY].●Motion pictures recorded in [AVCHD Lite] format cannot be set.[FACE REC EDIT]Edit or delete the recognition information for pictures with mistaken Face Recognition.Operation: On the playback screen, press [MENU/SET] and select [PLAYBACK]menu → [FACE REC EDIT]Select [REPLACE] or[DELETE]Select the pictureSelect a person• If [DELETE], go to step• People whose Face Recognitioninformation has not been registeredcannot be selected.Select the person to replacefor anotherSelect [YES]• After setting, press to return to themenu screen.●When Face Recognition information is deleted, it cannot be restored.●Pictures for which all Face Recognition information has been deleted are notcategorized in Face Recognition during [CATEGORY PLAY].●Recognition information cannot be edited in protected pictures.