Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Also see for Lumix DMC-ZS5: Basic operating instructions Operating instructions Operating instructions Operating instructions for advanced features Operating instructions

Contents

28 VQT2R20 VQT2R20 29For details about the setting procedure in the [SETUP] menu (→20)Using the [SETUP] menu (Continued)Item Settings, notes[VERSION DISP.]Check the version of thecamera firmware.Current version is displayed.[FORMAT]Use when [BUILT-INMEMORY ERROR]or [MEMORY CARDERROR] appears, orwhen formatting the built-in memory or card.When a card/built-inmemory is formatted,the data cannot berestored. Check thecontent of the card/built-in memorycarefully beforeformatting.[YES]/[NO]• This requires a sufficiently charged battery (→11), or anAC adaptor (optional) and DC coupler (optional). Whenformatting the built-in memory, remove the cards.(Only inserted card will be formatted if present; built-inmemory will be formatted if no card is inserted.)• Always format cards with this camera.• All picture data including protected pictures will bedeleted. (→135)• Do not turn off power or perform other operations duringformatting.• Formatting the built-in memory may take severalminutes.• Consult your nearest Service Center if format cannot besuccessfully completed.[LANGUAGE]Change displaylanguage.Set the language displayed on the screen.For details about the setting procedure in the [SETUP] menu (→20)[DEMO MODE]View demonstration offunctions.[STABILIZER DEMO.]: (Only during recording)Extent of jitter is shown on graph (estimate)Large ← Small → LargeExtent of jitterExtent of jitter after correction• During demo screen display, the Optical Image Stabilizerswitches ON and OFF every time [MENU/SET] ispressed.• Cannot display during Playback Mode.• To stop→ Press the [DISPLAY] button.• Recording and zoom cannot be performed during demo.[AUTO DEMO]: View introductory Slide Show[OFF]/[ON]• To close → Press [MENU/SET]• When a card is not inserted, Automatic Demo Modewill start if there is no operation for about two minuteswith the power ON when connected to the AC adaptor(optional) and DC coupler (optional).• [AUTO DEMO] cannot be displayed on external devicessuch as TVs.Item Settings, notes