Panasonic NN-SN790S Operating Instructions Manual

Contents

27Before Requesting ServiceThese things are normal:The oven causes Some radio and TV interference might occur when you cookinterference with with the microwave oven. This interference is similar to themy TV. interference caused by small appliances such as mixers,vacuums, blow dryers, etc. It does not indicate a problem withyour oven.Steam accumulates During cooking, steam and warm air are given off from theon the oven door and food. Most of the steam and warm air are removed from thewarm air comes from oven by the air which circulates in the oven cavity. However,the oven vents. some steam will condense on cooler surfaces such as theoven door. This is normal. After use, the oven should bewiped dry (see page 10).The oven is not plugged in Remove plug from outlet, waitsecurely. 10 seconds and re-insert.Circuit breaker or fuse is Reset circuit breaker or replacetripped or blown. fuse.There is a problem with the Plug another appliance into theoutlet. outlet to check if it is working.The door is not closed Close the oven door securely.completely.Start Pad was not pressed Press Start Pad.after programming.Another program is already Press Stop/Reset Pad to cancelentered into the oven. the previous program and enternew program.The program is not correct. Program again according to theOperating Instructions.Stop/Reset Pad has been Program oven again.pressed accidentally.The Glass Tray is not Take out Glass Tray and Rollerpositioned properly on the Ring. Wipe with a damp cloth andRoller Ring or there is food reset Roller Ring and Glass Trayunder the Roller Ring. properly.The Roller Ring and oven Clean these parts according tobottom are dirty. Care and Cleaning of yourMicrowave Oven (see page 10).The CHILD LOCK was See Function Pad on page 13-14.activated.Oven will not turn on.Oven will not startcooking.The Glass Traywobbles.When the oven isoperating, there isnoise coming fromthe glass tray.The word “LOCK”appears on theDisplay Window.PROBLEM POSSIBLE CAUSE REMEDYThis displaying indicates aproblem with the microwavegeneration system.Please contact an authorisedService Center (see page 28 or29).The oven stops cookingby microwave and "H97"or "H98" appears on thedisplay window.IP2892_39R00CP_26_100310 2010.3.10 13:28 Page 29