Panasonic NV-DS60 Operating Instructions Manual

Also see for NV-DS60: Operating instructions Features Operating instructions

Contents

46COPY INHIBITED:Because the medium is protectedby a copy guard, images cannot berecorded correctly.CAN NOT CHANGE MODE:The Mode of the Movie Camera cannot be changed in the PCconnection Mode.DISCONNECT DV CABLE:If the Movie Camera is in PhotoTitle (CAMERA mode) and the DVInterface Cable is connected,“DISCONNECT DV CABLE”appears. In this case, remove theDV Interface Cable from the MovieCamera.DISCONNECT USB CABLE:If you are attempting to record froma Cassette by pressing the PHOTOSHOT Button when the USB Cableis connected, “DISCONNECT USBCABLE” appears. In this case,remove the USB Cable from theMovie Camera.PICTURE (Blink during 3 seconds):When making DV connection at thetime of M-CARD mode.WEBCAM (Blink during 3 seconds):When making DV connection at thetime of Web Camera mode.STORAGE (Blink during 3 seconds):When making DV connection at thetime of USB Device Drive/SD Drive.~~~~~~~~~~~~~~~Notes and Hintsª Selecting Remote ControllerModesWhen 2 Movie Cameras are used simultaneously,they can be operated individually by selectingdifferent Remote Controller Modes.≥If the Remote Controller Mode of the MovieCamera and that of the Remote Controller do notmatch, [REMOTE] Indication is displayed.Setup on the Movie Camera:Set [REMOTE] on the [OTHER FUNCTIONS]Sub-Menu to the desired Remote ControllerMode. (l 14)Setup on the Remote Controller:[VCR1]: Press the [D] Button and [∫] Buttonsimultaneously.[VCR2]: Press the [E] Button and [∫] Buttonsimultaneously.≥When the battery in the Remote Controller isreplaced, the mode is automatically reset to[VCR1] Mode.ª Concerning the Power Supply≥When the Movie Camera is used for a long time,the Camera body becomes warm, but this is nota malfunction.≥If the [CHARGE] Lamp does not light upalthough the Battery is attached to AC Adaptor,detach the Battery and reattach it.≥Battery CGP-D110 and CGP-D105 cannot becharged with this AC Adaptor.ª Inserting/Removing the Cassette≥If a new Cassette is inserted, rewind to thebeginning of the tape before starting recording.≥When inserting the cassette, make sure it facesin the right direction and then push it in until itstops.ª Alarm SoundsWhen [BEEP SOUND] on the [OTHERFUNCTIONS] Sub-Menu on the [CAMERAFUNCTIONS] Main-Menu is set to [ON],confirmation/alarm beeps are issued as follows.1 Beep≥When you start recording.≥When you switch the [VCR/OFF/CAMERA/M-CARD] Switch from [OFF] to Camera Mode orCard Recording Mode.2 Beeps≥When you pause recording.4 Beeps≥If you perform a wrong operation before orduring recording.ª Recording≥Before turning on the power, remove the LensCap. If the Lens Cap is still attached when thepower is turned on, Automatic White BalanceAdjustment (l 56) may not function correctly.ª Recording Check≥For Recording Check, the recording speed mode(SP/LP) must be the same as the mode used forthe recording. If different, playback images willbe distorted.ª Recording with the Built-in VideoLight≥The subject should be within 1.5 metres of theMovie Camera.≥Using the Video Light reduces battery time.≥Set the Video Light to off when not in use.≥Do not look directly into the light.≥If the Video Light is used with a Conversion lensattached, a slight vignetting (darkening aroundedges) effect occurs on the screen.