Playback mode43VQT1L43Deleting files recorded on a cardThe deleted files cannot be restored.≥Set to Card Playback Mode.1 Move the joystick left or right to select a fileto delete.≥You can select a file in the multi-screen display.After selecting the file, press the joystick anddisplay the operation icon.2 Move the joystick down to select [ ].3 Move the joystick up or down in order toselect [DELETE 1 FILE] and then press it.4 When the confirming message appears,select [YES] and press the joystick.≥In order to stop deletion, select [NO].ª To delete all files1 Move the joystick down to select [ ].2 Move the joystick up or down in order toselect [ALL FILES] and then press it.3 When the confirming message appears,select [YES] and press the joystick.≥Do not turn off the power while deleting.≥To delete files, use the AC adaptor or asufficiently charged battery.≥In case of [ALL FILES], the deletion may taketime if there are many files on the card.≥If the “CARD FULL” indication appears whenrecording, the card is full and no further datacan be recorded. Insert a new card or set thecamera to Card Playback Mode and deleteunnecessary files.≥If files conforming to DCF standard are deleted,all the data related to the files will be deleted.ª Deleting still picture files recorded ona card by other equipment≥A still picture file (other than JPEG) that cannotbe played back on the movie camera may beerased.Downloaded From VideoCamera-Manual.com Manuals