Edit mode47VQT1L43Audio dubbingYou can add music or narration to the recordedcassette.(Audio dubbing can only be performed byusing the remote control.)≥Set to Tape Playback Mode.1 Find a scene that you want to add sound to,and press the [;] button on the remotecontrol.2 Press the [AUDIO DUB] button on theremote control to make audio dubbingready.3 Press the [;] button on the remote controlto start audio dubbing.≥Be sure that the sound is directed towards thebuilt-in microphone.4 Press the [;] button on the remote controlto stop audio dubbing.≥If a tape has a non-recorded portion when thetape is dubbed, images and sounds may bedisturbed when this portion of the tape is playedback.ª Before recording with audio dubbing≥Set to Tape Recording Mode.≥When you want to preserve the original soundtaken during recording, set [ADVANCED] >>[AUDIO REC] >> [12bit] to take pictures. (Whenset [16bit], the sounds taken during recordingare erased after recording with audio dubbing.)≥Set [BASIC] >> [REC SPEED] >> [SP] to takepictures.ª To play back the sound recorded withaudio dubbingYou can switch between the sound recorded withaudio dubbing and the original sound.Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].[ST1]: It only plays back the original sound.[ST2]: It only plays back the sound added byaudio dubbing.[MIX]: It simultaneously plays back the originalsound and the sound added with audiodubbing.≥During audio dubbing, it is automatically set to[ST2].Printing pictures by directlyconnecting to the printer (PictBridge)To print pictures by directly connecting the moviecamera to the printer, use a printer compatiblewith PictBridge. (Read the operating instructionsfor the printer.)≥Insert a card and set to Card Playback Mode.1 Connect the movie camera and the printerwith the supplied USB cable.1 USB cable≥The [PictBridge] indication appears on thescreen of the movie camera.(When the printer is being recognised, the[PictBridge] indication blinks.);A.DUB ;A.DUB ¥1PictBridgeDownloaded From VideoCamera-Manual.com Manuals