Before using9VQT1L43(20) LCD monitor -14-, -75-(21) LCD monitor open part -14-(22) Speaker -39-(23) Card access lamp -17-(24) Card slot -17-(25) Card slot cover -17-(26) Cassette holder -16-(27) Accessory shoe≥Accessories, such as a video DC light(VW-LDC102E; optional), are attached here.(28) Cassette eject lever [OPEN/EJECT] -16-(29) Cassette cover -16-(30) Zoom lever [W/T] -29-Volume lever [s /VOLr] -39-(31) Photoshot button [ ] -27-(32) Tripod receptacleThis is a hole for attaching the camera to optionaltripod/VW-CT45E. (Please carefully read theoperating instructions for how to attach the tripodto the camera.)≥You cannot open the card slot cover when thetripod is used. Insert the card first and thenattach the tripod.(33) Lens hoodIn order to remove the lens hood, rotate itcounterclockwise 1. In order to fit it, put into slot2, and then rotate it clockwise.≥Fit the MC protector or the ND filter of the FilterKit (VW-LF37WE; optional) in front of the lenshood. Do not fit the other accessories on thehood. (Except for the lens cap)(Refer to the operating instructions for the FilterKit.)≥When fitting the tele conversion lens(VW-LT3714ME; optional) or the wideconversion lens (VW-LW3707M3E; optional),first remove the lens hood.(Refer to the operating instructions for the teleconversion lens or the wide conversion lens.)≥When 2 lens accessories, such as the ND filterand tele conversion lens, are fitted and the[W/T] lever is pressed toward the [W] side, the 4corners of an image will be darkened.(Vignetting) (When fitting 2 lens accessories,first remove the lens hood and then fit them.)Due to limitations in LCD productiontechnology, there may be some tiny bright ordark spots on the LCD monitor screen.However, this is not a malfunction and doesnot affect the recorded picture.(20)(21)(22)(23) (24)(25)(26)(28)(29)(30)(31)(27)(32)1 2(33)Downloaded From VideoCamera-Manual.com Manuals