Others71VQT1L433: Even if connected by the USB cable, themovie camera is not recognised by the PC.• Is the USB driver installed? -52-4: When the USB cable is disconnected, anerror message will appear on PC.• To disconnect the USB cable safely, double-click the [ ] ( ) icon in the task tray andfollow the instructions on the screen.5: The movie camera malfunctions on editing,dubbing from digital video equipment, orusing “MotionDV STUDIO 6.0E LE for DV”or “SweetMovieLife”.• If a tape is recorded in multiple modes such asSP and LP (recording mode), 12bit and 16bit(sound recording mode), 4:3 and wide,recorded and unrecorded parts, the moviecamera may malfunction at a point where themode switches. When you edit, do not record inmultiple modes.6: Cannot see the PDF operating instructionsfor SweetMovieLife/MotionDV STUDIO.• Is Adobe Acrobat Reader 5.0 or later or AdobeReader 7.0 or later installed on the computerthat you are using? You will need AdobeAcrobat Reader 5.0 or later or AdobeReader 7.0 or later to read the PDF operatinginstructions for SweetMovieLife/MotionDVSTUDIO.7: The warning/alarm indication [°] appearswhen the camera is operated in the WEBcamera mode.• Did you press the menu button or the recordingstart/stop button? You cannot use the menu orrecord onto the tape/card in the WEB cameramode.• Is the setting for the remote control correct?• Did you attempt to play a tape without insertingit? Insert a tape.• Did you attempt to play a tape with copyrightprotection (copy guard)? Pictures of the tapewith copyright protection (copy guard) cannotbe displayed on the PC. (The audio of the tapecan be played.)• Is the USB driver installed? -52-Cautions for Useª About condensationIf you turn the movie camera on whencondensation occurs on the head or the tape,condensation Indication [3] (yellow or red) isdisplayed on the viewfinder or the LCD monitorand the messages [3DEW DETECT] or[3EJECT TAPE] (only when the tape isinserted) appear. If so, follow the procedurebelow.1 Remove the tape if it is inserted.≥It takes about 20 seconds to open thecassette holder. This is not a malfunction.2 Leave the movie camera with the cassettecover closed to cool or warm it to theambient temperature.≥The Status indicator blinks for about1 minute and then the movie cameraautomatically turns off. Leave it for about 1.5to 2 hours.3 Turn the movie camera on again, set it tothe Tape Recording/Playback Mode andthen check if the condensation indicationdisappears.Especially in cold areas, moisture may be frozen.If so, it may take more time before thecondensation indication disappears.Watch for condensation even before thecondensation Indication is displayed.≥If the indicator of the condensation does notdisplay on the LCD monitor and/or viewfinderand you notice condensation on the lens or themain unit, do not open the cassette coverotherwise condensation may be formed on theheads or the cassette tape.When the lens is fogged:Set the [OFF/ON] switch to [OFF] and leave themovie camera in this condition for about 1 hour.When the lens temperature becomes close to theambient temperature, the fogging disappearsnaturally.Downloaded From VideoCamera-Manual.com Manuals