20Search FunctionsRQTV0057You can find what kind of programmes are recorded with thecharacter and the icon indications.1) While the Jet Navigator list appears, press [NAVI] and thenpress [1] (cursor).2) Press [342 1] to select the desired category.3) Press [ENTER].This unit automatically adds special index signals on the tape whenrecording starts. You can find the desired programme quickly withthese signals.During stop or playback,Press [:] (backward) or[ 9] (forward).≥Each press increases the number of skip.¬ To cancel the Index Search or to stop playbackPress [∫STOP].Notes:≥Up to 20 index signals can be searched for from both directions.≥When you press either one of the button too many times, you cancontrol the number of skips by pressing the opposite button.≥The figure on the display decreases by 1 each time an index signalis located.≥This feature may not work correctly if the marks are too closetogether. Make recordings of at least 5 minutes.¬ Index signals are recorded in the following cases≥When a recording is started by pressing [¥REC].≥When [¥REC] on the remote control is pressed during recording.≥When timer recording is activated.You can find a timer-recorded programme with One-touch operationand play it back easily.≥Set timer recording for the programme you wish to view.Press [PROG PLAY].≥As soon as the timer-recorded programme isfound, playback startsautomatically.¬ To cancel the Easy Programme PlaybackPress [∫STOP].Notes:≥The unit memorizes the position at which timer recording is set tothe standby mode by pressing [ TIMER] as the start point ofEasy Programme Playback.≥When there is no programmed timer recording data, the message“CAN NOT FIND PROG PLAY DATA.” appears on the TV.≥If you take out the cassette after a timer recording has finished, thisfunction does not work.Set the categoryVHS Index Search System (VISS)CATEGORY SE TTINGENTERMOVIEMUSICDRAMAEDUCADOCUMSPORTCH I LDNEWSOTHER– – – – –Easy Programme PlaybackPROG PLAY