Panasonic NV-VP33 Series Operating Instructions Manual

Also see for NV-VP33 Series: Operating instructions Operating instructions

Contents

VHS Operations21RQTV0057Settings Using the On-Screen DisplayChange the settings to suit your preferences and to suit the unit tothe environment in which it is being used. These settings areretained in memory until they are changed, even if the unit is turnedoff.≥Select the unit viewing channel (or the AV input) on the TV.≥Press [VHS].........................................................................................................................................................................................................................[1] Press [MENU].................................................................................................[2] Press [34] toselect the menu.................................................................................................[3] Press [ENTER].¬ For CLOCK SET (l 12)The unit tunes automatically when you plug it in and turn it on for thefirst time (NV-VP33GN only, l 11), but you can start the processagain if necessary.≥Select any programme position except “A1”, “A2” or “dc”.Auto tuning searches for TV stations from VHF minimum to UHFmaximum and memorizes every tuned programme position. Otherprogramme positions are skipped (Channel plan l below).........................................................................................................................................................................................................................[1] Press [34] toselect “AUTOTUNE”..............................................................................................[2] Press [2 1] tostart Auto Tuning.≥It may take up to 5minutes or more tocomplete.≥When Auto Tuning iscompleted, the on-screen displaydisappears andprogramme position 1 isselected.¬ To stop halfway throughPress [MENU].¬ If the unit is not correctly tuned by Auto TuningFollow the procedure on the right (Manual Tuning).Channel plan.......................................................................................................................................................................................................................[1] Press [34] to select “CH” and select thechannel with [2 1]........................................................................................................................................................................................................................[2] Press [34] toselect “CLEAR”and select “OFF”with [2 1].ª To select a blankprogramme,select “ON”. If youselect “ON”, proceed tostep 4.≥To restore the channelagain, select “OFF”.≥Repeat steps 1 and 2for another unoccupiedprogramme positions toskip during the selectionof the programmepositions..............................................................................................[3] Select “SEARCH”with [34] thenpress [2 1] tostart the Manual Tuning.≥If the desired TV station has not been tuned, press [2 1]again.≥Press [MENU] and repeat steps 1-3 for each programmeposition you want to tune to a station.≥You can also set the programme position directly by enteringthe number with the numeric buttons (l below)........................................................................................................................................................................................................................[4] Press [MENU] repeatedly until the settingscreen disappears........................................................................................................................................................................................................................[1] Press [34] to select “CH” and select thechannel with [2 1]........................................................................................................................................................................................................................[2] Select “FINE” with [34] then press [2 1] toobtain the best tuning condition.≥Press [ENTER] to return the tuning to its former state........................................................................................................................................................................................................................[3] Press [MENU] until the setting screendisappears.Common proceduresTUNER PRESETAuto TuningVHF UHF CATVNV-VP33GL 0-12 28-69 45-470 MHzNV-VP33GN 1-11 21-69 44-470 MHzVHS MENUCLOCK SETTUNER PRESETSYSTEMOPTIONTAPE REFRESHSELECT : , ENTEREND : MENUThe number of channels still to be autotuned.TUNER PRESETEND : MENUCH 1CLEAR [OFF]AUTO TUNESEARCH [3]F INECH 1 SEARCH 100END : MENUThe number of channels still to be autotuned.Manual TuningDirect TuningAfter you select “SEARCH”, press the numeric buttons toselect the programme position.For the 5A and 9A channels, input the following numbers.90 for CH-5A, 91 for CH-9A. (Example for NV-VP33GL)≥For other channels that require tuning, repeat steps above.Fine TuningCH 2 SEARCHEND : MENU74CH 2 SEARCHEND : MENUTUNER PRESETCH 2CLEAR [OFF]AUTO TUNESEARCH [3]F INECHFINE2 AFC : ENTEREND : MENU