TimerRecording UsingVCRPlus+*System(continued)ItisnecessarytoprogramtheVCRwithlocalchannelinformationforproperVCRPlus+Systemoperation.VCRPlus+SystemChannel Setup*Atfirst,doChannelSetupPreparationsbelowright.1 Display menu.Ro Press ACTION.*MENU Select SET UPSET UP VCRSET UP FEATURE CHANNEL.UP CHANNEL 1) Press AVISET UPCHANNEL|pDIOMAT LANGUE:ENGLISH to select.R' S OUT H:3SELECT: 4 Y KEY 2) Press >SET ¡Pb KEY to display.END ‘ACTION KEYSelect VCR Plus+CHANNEL SETUP.SET UP CHANNELANTENNA : CABLEAUTO SETCHANNEL CAPTIONWEAK SIGNAL DISPLAY : OFF 1) Press AVCABLE/DSS BOX SET UP to select.SELECT:A Y KEY 2) Press >SET :b KEY to display.END :ACTION KEYSelect VCR Plus+VCA Plus+ CH SET UPGUIDE CH CABLE CH channels. 1) Press >> e to movecursortoSELECT:A Y KEYSET :» KEY rightEND ¡ACTION KEY column.2) Press AY to changeVCR Plus+ CH SET UP CABLE CH number.3) Press < to set.> 01 4) Press AV to scroll02 up/down GUIDE CHSELECT:4 Y KEY column.ET ¡4 KEY AEl “ACTION KEY * Repeat step 4 until list iscomplete.GUIDE CH CABLE CHTo make corrections,Press AY and > to move to error, then AY to change,or ADD/DLT* to erase number.End setup.A Press ACTIONO three times.¢ Make each entry within 5 minutes or the VCR will exit this mode.e Once local channels have been programmed, they will stay inmemory, even in the case of a power failure.16 For assistance, call 1-800-211-PANA(7262).Process of RecordingConnection[Sat|=>ProgrammingSELECT/ADD/DELETEChannel Setup PreparationsIn order to complete step 4 left, make alocal channel list (see example below).You will need the following:* A line up of normal TV and’ or Cable stations andthe channel number Phe receive them on.* A list of Guide (PlusCode) channel numbers forthe stations you receive found in TV Guide andselected newspapers.1 Make a 3-column chart. In the left column, writethe name of all the stations you receive.2 In the middle column, write each station's Guide(PlusCode) number from TV Guide.3 In the right column, write the channel numberyour TV receives the station on.EXAMPLE ONLYAssigned | Channel no.Broadcast or Guide your TVCable (VCR Plus+) | receivestheStation Name | channel no. station on[Nickelodeon| 38 | 20 |CBS |