Panasonic PT-43LC14-K Operating Instructions Manual

Contents

72-MENU- PAGE: 1/ 6SINGLESLIDESD/PCACCESS 200_PANAIndex AreaFolders and files aredisplayed here.Notes:• Up to 1 000 JPEG files canbe displayed. (This numbermay be lower if subfolders,or files other than JPEG areincluded in the folder.)• Depending on JPEGfile type, “JPEG” willbe displayed instead ofthumbnail image.• Only JPEG files can bedisplayed.Display Page No.When the displayed files/folders fill more than onepage, the total number ofpages is displayed.Card Menu ScreenFolder Name AreaThe name of the selectedsubfolder (framed in yellow) isdisplayed.The screen below is displayed automatically when a card is inserted. If “NO CARD” appears, confirm that acard is correctly inserted.SubfolderThe subfolder ofthe currentlydisplayed folder isopened.Parent FolderReturns currentlydisplayed folder tothe parent (previous)folder.ACCESS IndicationACCESS is displayedwhile data is read.Menu AreaSelect display method(SINGLE PLAY orSLIDE SHOW).Confirm the displayedcard type (SD Card orPC Card).SD Card slotSD CardMultiMediaCardCompatible CardFront Card Slot (P. 10)SD CardPress PC CardEJECT TAB twice.• The media* listed in the right column above can be read viathe PC Card adaptor in the PC Card slot.• Hard disk PC Cards, Flash ATA Cards, and other recordedmedia cannot be used.• Place the selected media onto the PC Card adaptor and theninsert into the PC Card Slot.• When both an SD Card and PC Card are inserted, the SDCard contents has priority and will be displayed.• If the Card is unusable, “CARD FORMAT NOTSUPPORTED” is displayed on-screen. Remove the Cardonly when ACCESS is not displayed.• If an incompatible JPEG file is displayed (full size filepreview), “DATA FORMAT NOT SUPPORTED” is displayed.Press in lightlyon SD Card,then release.Insert the Card.Remove the Card.Notes:• Insert/remove Card while “Card Menu Screen” or “NOCARD” is displayed.• Be sure ACCESS is not displayed before Card insertion/removal.• Fully insert the Card (ACCESS is displayed). Wait untilACCESS goes out before removing.• Before reinserting a Card after removing it, wait until “NOCARD” is displayed. If there are Cards in both Card Slots,wait until the Card Menu Screen of the other Slot is displayedand ACCESS is no longer displayed before reinserting aCard.PC CardPC Card slotCompact Flash*Smart Media*Memory Stick*xD Picture Card*Photo Viewer (SD Card/PC Card)