Panasonic PT-AE4000E Functional Instructions

Also see for PT-AE4000E: Functional instructions Operating instructions Brochure & specs

PICTURE menu22 - ENGLISHAdjusting with luminance optionsQPress the1. ENTER button several times to displayFULL SCAN(Y)/SINGLE LINE SCAN(Y).In SINGLE LINE SCAN mode, select the requiredadjusting point by pressing ▲ ▼.Press the2. PICTURE ADJUSTMENT button anddisplay the BRIGHTNESS by pressing ▲ ▼.When ADVANCED MENU is displayed, press thebutton again to switch to the PICTURE menu.Adjust by pressing ◄ ►.3.Adjust the bottom line of the waveform to 0 % (0 or7.5 IRE).Setting range: −32 to +32Press ▲ ▼ to display the4. CONTRAST.Adjust by pressing ◄ ►.5.Adjust the up line of the waveform to 100 %(100 IRE).Setting range: −64 to +64FULL SCAN(Y)/SINGLE LINE SCAN(Y)BRIGHTNESS Adjust the bottom line of thewaveform to 0 % (0 or 7.5 IRE)CONTRAST Adjust the top line of the waveformto 100 % (100 IRE)Adjusting with RGB optionsQPress the1. ENTER button several times to displaythe required R/G/B waveform option.In SINGLE LINE SCAN mode, select the requiredadjusting point by pressing ▲ ▼.Press the2. PICTURE ADJUSTMENT button anddisplay the BRIGHTNESS R/BRIGHTNESS G/BRIGHTNESS B by pressing ▲ ▼.When PICTURE menu is displayed, press the buttonagain to switch to the ADVANCED MENU.Adjust by pressing ◄ ►.3.Adjust the bottom line of the waveform to 0 % (0 or7.5 IRE).Setting range: −16 to +16Press ▲ ▼ to display the4. CONTRAST R/CONTRAST G/CONTRAST B.Adjust by pressing ◄ ►.5.Adjust the up line of the waveform to 100 %(100 IRE).Setting range: −32 to +32FULL SCAN(R)/SINGLE LINE SCAN(R)BRIGHTNESS R Adjust the bottom line of thewaveform to 0 % (0 or 7.5 IRE)CONTRAST R Adjust the top line of the waveformto 100 % (100 IRE)FULL SCAN(G)/SINGLE LINE SCAN(G)BRIGHTNESS G Adjust the bottom line of thewaveform to 0 % (0 or 7.5 IRE)CONTRAST G Adjust the top line of the waveformto 100 % (100 IRE)FULL SCAN(B)/SINGLE LINE SCAN(B)BRIGHTNESS B Adjust the bottom line of thewaveform to 0 % (0 or 7.5 IRE)CONTRAST B Adjust the top line of the waveformto 100 % (100 IRE)SPLIT ADJUSTYou can perform image adjustment for some PICTUREmenu items while displaying a certain area of the frozenimage in a split window.SPLIT ADJUST MODEQSelect the required split style from NORMAL andREVERSE in the SPLIT ADJUST MODE menu.NORMALMOVE AREA GO TO SPLIT ADJUSTENTER GO TO FREEZE SCREENRETURNREVERSEMOVE AREA GO TO SPLIT ADJUSTENTER GO TO FREEZE SCREENRETURNAdjusting the image in a split windowQSelect1. AREA SELECT and press the ENTERbutton.The image will be frozen and the area cursor will bedisplayed.MOVE AREA GO TO SPLIT ADJUSTENTER GO TO FREEZE SCREENRETURNPress ◄ ► to move the area cursor to select the2.area of interest and press the ENTER button.The selected frozen image will be displayed in a splitwindow.