Panasonic PT-D4000U Operating Instructions Manual

Also see for PT-D4000U Series: Setup and operation manual Operating instructions Limited warranty Brochure & specs

Contents

Panasonic PT-D4000U Operating Instructions Manual Manual pdf 25 page image

25Automatic adjustment(AUTO SETUP)Automatic adjustment function adjust the resolution,clock phase and image position automatically whendots-structured analog RGB signals such as computersignal are supplied. (Automatic adjustment is notavailable if moving picture input signals or signalshaving a dot clock frequency of more than 150 MHzare supplied.) When DVI signals are input, the imageposition is adjusted automatically.It is recommended to supply images with a bright whiteframe at the outermost periphery containing charactersetc. that are clear in white and black contrast when thesystem is in automatic adjustment mode. Avoidsupplying images that involve halftones or gradationsuch as photographs and computer graphics.• “CLOCK PHASE” may have been shiftedeven when the adjustment endednormally. In this case, manually adjust the“CLOCK PHASE”.• Automatic adjustments cannot beperformed when images with blurrededges or dark images are input.With Composite sync and G-SYNC syncsignals and some types of PCs, it may notbe possible to perform these automaticadjustments.In this case, manually adjust the items of“INPUT RESOLUTION”, “CLOCK PHASE”and “SHIFT”.• Image may be disturbed for about 4seconds during automatic adjustment,which is not an abnormal error.NoteUsing the SHUTTER functionIf the projector is not going to be used for a certainperiod of time such as while a meeting is on a break orpreparations are being made, the mechanical shuttercan be used to hide the images temporarily.Press the SHUTTER button of theremote control or the main unit.The image is turned off.Press the SHUTTER button again.The image comes back.How to adjust the lensposition to the left or rightWhen the lens left/right adjustment dial is turnedclockwise, the screen moves toward the left;conversely, when it is turned counterclockwise, itmoves toward the right. The maximum traveldistance toward the left or right is about 10 % ofthe projection screen width.MaximumadjustmentpositionThe screenmoves towardthe leftThe screenmoves towardthe rightLens left/rightadjustment dial• Move the lens left/right adjustment dialto any position up to the maximumadjustment position to make theadjustment. Turning the dial with undueforce may cause malfunctioning.AttentionThis shows the projector status. It can also be used tosend information about the projector’s status via E-mail.Press the STATUS button on the remotecontrol.Status functionSTATUSINPUTPROJECTOR RUNTIMEINTAKE-AIR TEMP.OPTICS MODULE TEMP.TEMP. AROUND LAMPMAIN VERSIONNETWORK VERSIONREMOTE2XGA60 RGB148.36kHz/60.00Hz33h13h/ ON/13h/ ON/LAMP1LAMP225 °C / 77 °F37 °C / 98 °F37 °C / 98 °F1.00.001.00DISABLEEXITSEND STATUS VIA E-MAIL