Panasonic PT-D4000U Operating Instructions Manual

Also see for PT-D4000U Series: Setup and operation manual Operating instructions Limited warranty Brochure & specs

Contents

Panasonic PT-D4000U Operating Instructions Manual Manual pdf 36 page image

36OPTION2 settings Displaying the internal test patternSYSTEM INFORMATIONThe projector’s system information can be viewed.SYSTEM INFORMATIONMAIN VERSIONNETWORK VERSIONPROJECTOR RUNTIMELAMP1LAMP2LAMP1 ONRETURNLAMP2 ON1.00.001.00300h100h100h2020AUTO POWER OFFThe projector can be automatically set to thestandby mode if no signals are input for the setduration.DISABLE:This is the standard setting. This function is setto OFF.45MIN. – 90MIN.:The duration can be set in 15-minuteincrements from 45 to 90 minutes.DATE AND TIMEThis lets you set the time zone and the current dateand time for the projector’s internal clock.TIME ZONE: Set the time zone of your country.ADJUST CLOCK: Set the current date and time.LOCAL DATE/LOCAL TIME: Date and time set in above are displayed.PASSWORDThis function is used by a service person.Input the password with the numeric buttons (0 to9) of the remote control and press the ENTERbutton to confirm the entry.The projector has eight types of internal test patternsto check the condition of the set.To display test patterns, follow the steps below.Press the TEST PATTERN button on theremote control.Or select “TEST PATTERN” in the MAINMENU and search through the varioustypes of test patterns by usingbuttons.• Results of adjustment on the image,picture quality, position, size and otherfactors will not be reflected in testpatterns. Be sure to display the inputsignal before performing various kindsof setting.NoteCycle of displayed internaltest patternsMENU screen+Entry screen All whiteAll blackFlag16:9 frameFocusColor barsWindow (inversion)WindowBlack onwhite groundWhite onblack ground