Panasonic PT DW5100UL Operating Instructions Manual

Contents

Panasonic PT DW5100UL Operating Instructions Manual Manual pdf 58 page image

58Ceiling Mount Bracket SafeguardsThe projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cableprovided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling forsafety and security.Installation work of the ceiling mount bracket should only be carried by a qualified technician according to thefollowing procedure.• Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using aceiling mount bracket which is not purchased from an authorized distributors, or environmental conditions.• Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.• An unused ceiling mount bracket should be removed promptly by qualified technician.The followings are included with the other accessories.Install the ceiling mount bracketaccording to the InstallationInstructions.Attach anchor nuts or curl plugsavailable in the market (M8 or 5/16") to astrong ceiling surface in positions (leftfigure) so that there is no slack in thewire cable provided with the projector.Pass the loop of wire rope throughanchoring area and tighten the hexhead bolts.Attach the metal fittings at the ends ofthe cable to the locking holes in theprojector main unit using the providedwire fastening M6 screws, and tightenthe screws firmly to secure theprojector.max. 1 m (3'3")(recommended)Wire cableHex head bolt (M8 or 5/16")Flat washerSpring washerAnchoring nutsor curled plugs (M8 or 5/16")max. 1 m (3'3")(recommended)Wire cable (x 1)[TKLA3201]Wire fastening M6 screw (x 1)[XYN6+F10FJ]* If for any reason the enclosed screw become lost ormisplaced, please use the following.Screw diameter: M6, Length:10 mm (the effectivethread depth on the receiving side is 10 mm)* Likewise if the screws for attaching the customceiling mount bracket go missing, please use thefollowing.Screw diameter: M6, Length:10 mm (the effectivethread depth on the receiving side is 10 mm)Torque Loading: 4±0.5 Nm (for 6 mm screw)Cabinet ExteriorSecuring Screw(M6)Wire metal end fittingEffective screw depth10 mm