ENGLISH - 69Chapter 4 Settings — [DISPLAY OPTION] menu5) Press the button.rf The [MEASURED DATA] screen is displayed.6) Measure the current luminance (Y) and thechromaticity coordinates (x, y) using thecolorimeter.7) Press as to select a color, then press qw toadjust the value.8) Once all the input is completed, press therf The [MEASURED MODE] screen is displayed.9) Press as to select [TARGET DATA].10) Press the button.rf The [TARGET DATA] screen is displayed.11) Press as to select a color, and press qw toinput coordinates for desired colors.12) Once all the input is completed, press theNoterf Colors are not displayed properly when target data is a color outside the region of this projector.rf Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.rf When using a colorimeter or similar instrument to measure measurement data, measure the colors displayed with [AUTO TESTPATTERN].rf A difference in the color coordinates of target data and measurement values obtained from an instrument may occur for certain instrumentsand measurement environments used.[COLOR CORRECTION]Colors can be adjusted and registered for each input signal format.1) Press as to select [COLOR CORRECTION]. 2) Press qw to switch [COLOR CORRECTION].rr [COLOR CORRECTION][OFF] Standard setting[USER]For each of the four signal formats, VIDEO, S-VIDEO, RGB, and YCBCR/YPB PR, six colors including red,green, blue, cyan, magenta, and yellow can be adjusted and registered. Press the button to setdetails. The adjustment range is between -30 and +30.[CONTRAST MODE]There are two modes. Set according to the operating environment.1) Press as to select [CONTRAST MODE]. 2) Press qw to switch [CONTRAST MODE].rr [CONTRAST MODE][NORMAL] Maximizes brightness.[HIGH] Maximizes contrast.[SCREEN SETTING]Set the screen size.When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as necessary for the screen inuse.1) Press as to select [SCREEN SETTING].2) Press the button.rf The [SCREEN SETTING] screen is displayed.3) Press qw to switch [SCREEN FORMAT].rf The setting will change between [16:10] and [16:9] forPT-DW640E, or [4:3] and [16:9] for PT-DX610E.4) Press as to select [SCREEN POSITION].5) Press qw to adjust [SCREEN POSITION].rr [SCREEN FORMAT]PT-DW640E[16:10][SCREEN POSITION]Cannot be adjusted.[16:9] Vertical position can be adjusted between - 40 and40.PT-DX610E[4:3] Cannot be adjusted.[16:9] Vertical position can be adjusted between -96 and96.
