Panasonic PT-DW640EL Operating Instructions Manual

Also see for PT-DW640E: Operating instructions

Contents

Panasonic PT-DW640EL Operating Instructions Manual Manual pdf 80 page image

80 - ENGLISHChapter 4 Settings — [PROJECTOR SETUP] menu[S-VIDEO] Sets the input to be projected when the projector is switched on to S-VIDEO.[DVI-D] Sets the input to be projected when the projector is switched on to DVI-D.[HDMI] Sets the input to be projected when the projector is switched on to HDMI.[RS-232C]Set the communication conditions of the / terminal.To set the communication condition of the terminal1) Press as to select [RS-232C].2) Press the button.rf The [RS-232C] screen is displayed.3) Press as to select [(IN) BAUDRATE].4) Press qw to switch [(IN) BAUDRATE].rf The setting will change among [9600], [19200], and [38400]each time you press the button.5) Press as to select [(IN) PARITY].6) Press qw to switch [(IN) PARITY].rf The setting will change among [NONE], [EVEN], and [ODD]each time you press the button.rr [(IN) BAUDRATE][9600]Select the proper speed.[19200][38400]rr [(IN) PARITY][NONE]Select the parity condition.[EVEN][ODD]To set the communication condition of the terminal1) Press as to select [RS-232C].2) Press the button.rf The [RS-232C] screen is displayed.3) Press as to select [(OUT) BAUDRATE].4) Press qw to switch [(OUT) BAUDRATE].rf The setting will change among [9600], [19200], and [38400]each time you press the button.5) Press as to select [(OUT) PARITY].6) Press qw to switch [(OUT) PARITY].rf The setting will change among [NONE], [EVEN], and [ODD]each time you press the button.rr [(OUT) BAUDRATE][9600]Select the proper speed.[19200][38400]rr [(OUT) PARITY][NONE]Select the parity condition.[EVEN][ODD]To set the response1) Press as to select [RS-232C].2) Press the button.rf The [RS-232C] screen is displayed.3) Press as to select [RESPONSE(ID ALL)].4) Press qw to switch [RESPONSE(ID ALL)].rf The setting will change between [ON] and [OFF] each time youpress the button.5) Press as to select [GROUP].