|
70 - ENGLISHChapter 4 Settings — [DISPLAY OPTION] menu[AUTO SIGNAL]Set automatic execution of auto setup.The screen display position or signal level can be adjusted automatically without pressing the button on the remote control oneach occasion if you input unregistered signals frequently at meetings, etc.1) Press as to select [AUTO SIGNAL]. 2) Press qw to switch [AUTO SIGNAL].rf The setting will change between [OFF] and [ON] each time youpress the button.rr [AUTO SIGNAL][OFF] Set input auto setup to off.[ON] Auto setup is automatically executed when images are changed to unregistered signals during projection.[AUTO SETUP]You can set when adjusting a special signal or horizontally long (16:9, etc.) signal.1) Press as to select [AUTO SETUP].2) Press the button.rf The [AUTO SETUP] screen is displayed.3) Press qw to switch [MODE].rf The setting will change among [DEFAULT], [WIDE], and [USER]each time you press the button.rf When [DEFAULT] or [WIDE] is selected, proceed to Step 6).rf When [USER] is selected, proceed to Step 4).4) Press as to select [DISPLAY DOTS], andpress qw to adjust [DISPLAY DOTS] to thehorizontal resolution of the signal source.5) Press as to select [MODE].6) Press the button.rf Automatic adjustment is executed. [PROGRESS] is displayedwhile automatically adjusting. When complete, the systemreturns to the [AUTO SETUP] screen.rr [MODE][DEFAULT]Select when receiving a signal whose image aspect is 4:3 or 5:4. (Supported resolutions are 640 x 400,640 x 480, 800 x 600, 832 x 624, 1 024 x 768, 1 152 x 864, 1 152 x 870, 1 280 x 960, 1 280 x 1 024, 1 600x 1 200, and 1 400 x 1 050.)[WIDE] Select when receiving a signal whose image aspect is wide-screen. (Supported resolutions are 1 280 x720, 1 280 x 800, 1 440 x 900, 1 680 x 1 050, 1 920 x 1 080, and 1 920 x 1 200.)[USER] Select when receiving a signal with a special horizontal resolution (number of display dots).[RGB IN]Set to match the signal to input to the terminal.1) Press as to select [RGB IN].2) Press the button.rf The [RGB IN] screen is displayed.3) Press as to select [RGB1 SYNC SLICELEVEL] or [RGB2 SYNC SLICE LEVEL].4) Press qw to switch between [RGB1 SYNCSLICE LEVEL] and [RGB2 SYNC SLICELEVEL].rf The setting will change between [LOW] and [HIGH] each timeyou press the button.rr [RGB1 SYNC SLICE LEVEL] and [RGB2 SYNC SLICE LEVEL][LOW] Set the slice level to [LOW].[HIGH] Set the slice level to [HIGH].[DVI-D IN]Switch the setting when the external equipment is connected to the terminal of the projector and the image is not projectedcorrectly.1) Press as to select [DVI-D IN].2) Press the button.rf The [DVI-D IN] screen is displayed.3) Press as to select [DVI EDID].4) Press qw to switch [DVI EDID].rf The setting will change among [EDID3], [EDID1],and[EDID2:PC] each time you press the button.5) Press as to select [DVI SIGNAL LEVEL].
|
