Panasonic PT-DW640EL Operating Instructions Manual

Also see for PT-DW640E: Operating instructions

Contents

Panasonic PT-DW640EL Operating Instructions Manual Manual pdf 81 page image

ENGLISH - 81Chapter 4 Settings — [PROJECTOR SETUP] menu6) Press qw to switch [GROUP].rf The setting will change among [A] to [Z] each time you pressthe button.7) Press as to select [RESPONSE(ID GROUP)].8) Press qw to switch [RESPONSE(ID GROUP)].rf The setting will change between [ON] and [OFF] each time youpress the button.rr [RESPONSE(ID ALL)][ON] Returns the response when the ID setting is ALL.[OFF] Does not return the response when the ID setting is ALL.rr [GROUP][A] - [Z] Controls multiple projectors simultaneously by sending the ID of RS-232C.Set the group from [A] to [Z]. The projector responds when the ID of RS-232C matches the setting.rr [RESPONSE(ID GROUP)][ON] Returns the response when the ID setting is GROUP.[OFF] Does not return the response when the ID setting is GROUP.Noterf Refer to “/ terminal” (x page 121).[REMOTE2 MODE]You can set the terminal.1) Press as to select [REMOTE2 MODE].2) Press qw to switch [REMOTE2 MODE].rf The setting will change between [DEFAULT] and [USER] eachtime you press the button.rf When [USER] is selected, proceed to Step 3).3) Press the button.4) Press as to select any from [PIN2] to [PIN8]and press qw to switch the setting.rf [PIN1] and [PIN9] cannot be changed.rr [REMOTE2 MODE][DEFAULT] The pin assignment of the terminal is used by the factory default setting of the projector.(x page 124)[USER] The pin assignment of the terminal is used by the setting changed from the factory defaultsetting of the projector.[STATUS]Displays the status of the projector.1) Press as to select [STATUS].2) Press the button.rf The [STATUS] screen is displayed.3) Press qw to switch the pages.rf The page will change each time you press the button.rr Contents to be displayed[INPUT] Displays the input terminal currently selected.[SIGNAL NAME] Displays the input signal name.[SIGNAL FREQUENCY] Displays the frequency of the input signal.[PROJECTOR RUNTIME] Displays the operation times of the projector.[LAMP1] * Displays the hours used of lamp 1.[LAMP2] * Displays the hours used of lamp 2.[INTAKE AIR TEMP.] Displays the status of the air intake temperature of the projector.[OPTICS MODULE TEMP.] Displays the status of the internal temperature of the projector.[AROUND LAMP TEMP.] Displays the status of the temperature around the lamps of the projector.[PROJECTOR TYPE] Displays the type of the projector.[SERIAL NUMBER] Displays the serial number of the projector.[LAMP UNIT MODEL NO.] Displays the model no. of the lamp unit.