Chapter 4 Settings — [PROJECTOR SETUP] menuENGLISH - 125Setting the time zone1) Press as to select [DATE AND TIME].2) Press the button.f The [DATE AND TIME] screen is displayed.3) Press as to select [TIME ZONE].4) Press qw to switch [TIME ZONE].Setting the date and time manually1) Press as to select [DATE AND TIME].2) Press the button.f The [DATE AND TIME] screen is displayed.3) Press as to select [ADJUST CLOCK].4) Press the button.f The [ADJUST CLOCK] screen is displayed.5) Press as to select an item, and press qw to set the local date and time.6) Press as to select [APPLY], and press the button.f The setting of the date and time will be completed.Setting the date and time automatically1) Press as to select [DATE AND TIME].2) Press the button.f The [DATE AND TIME] screen is displayed.3) Press as to select [ADJUST CLOCK].4) Press the button.f The [ADJUST CLOCK] screen is displayed.5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].6) Press as to select [APPLY], and press the button.f The setting of the date and time will be completed.Notef To set the date and time automatically, the projector must be connected to the network.f If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], [NTP SYNCHRONIZATION] will return to[OFF]. Also if [NTP SYNCHRONIZATION] is turned [ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].f Access the projector via a web browser to set the NTP server. Refer to “[Adjust clock] page” (x page 152) for details.f If [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] (x page 126) is executed, [TIME ZONE] settings are reset to thefactory defaults. However, the date and time based on the local date and time setting (Coordinated Universal Time, UTC, Universal Time,Coordinated) will be maintained without being initialized.[LENS CALIBRATION]Detect the lens shift limit value of the projector and set the home position and the ET-DLE030 standard lensposition automatically.1) Press as to select [LENS CALIBRATION].2) Press qw to switch the item.f The items will switch each time you press the button.[NORMAL] Select this item when anything other than the fixed-focus lens (Model No.: ET-DLE030) is used.Move the lens to the home position after completing the calibration.
