Chapter 4 Settings — [NETWORK] menuENGLISH - 141[DNS2] Displays the address of the secondary DNS server.[MAC ADDRESS] Displays the [MAC ADDRESS].[DIGITAL LINK MENU]When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connectedto the terminal, the main menu of DIGITAL LINK output supported device is displayed.Refer to the Operating Instructions of the DIGITAL LINK output supported device for details.Notef When [EXTRON XTP] is set to [ON], [DIGITAL LINK MENU] cannot be selected.f The operation guidance for the “RETURN” button is displayed on the menu screen of the Digital Interface Box and DIGITAL LINK Switcher.The projector does not have the “RETURN” button, but same operation is available with the [Art-Net SETUP]Make settings to use the Art-Net function. For the channel definitions used for controlling the projector with the Art-Net function, refer to “Using Art-Net function” (x page 175).1) Press as to select [Art-Net SETUP].2) Press qw to select an item.f The items will switch each time you press the button.[OFF] Disables the Art-Net function.[ON(2.X.X.X)] Enables the Art-Net function and sets the IP address to 2.X.X.X.[ON(10.X.X.X)] Enables the Art-Net function and sets the IP address to 10.X.X.X.[ON(MANUAL)] Enables the Art-Net function and uses the IP address set in [NETWORK SETUP].f When other than [OFF] is selected, proceed to Step 3).3) Press the button.f The [Art-Net SETUP] screen is displayed.4) Press as to select [CHANNEL SETUP].5) Press qw to switch the item.[DEFAULT] Uses the channel assignment with the standard setting for the projector.[USER] Uses to change the channel assignment.[DZ870/DZ21K]Uses the channel assignment with DZ870 series and DZ21K series compatible.DZ870 series: DZ870 series, DW830 series, DX100 seriesDZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K seriesf When [DEFAULT] or [DZ870/DZ21K] is selected, pressing the button displays the functionassigned to the channel.f When [DEFAULT] or [DZ870/DZ21K] is selected, proceed to Step 9).6) Press the button.f The [CHANNEL SETUP] screen is displayed.7) Press as to select the channel to set, and press qw to switch the item.[LIGHT OUTPUT] Adjusts the amount of light.[INPUT SELECT] Switches the input.[LENS POSITION] Moves the lens position.[LENS H SHIFT] Adjusts the lens shift in the vertical direction.[LENS V SHIFT] Adjusts the lens shift in the horizontal direction.[LENS FOCUS] Adjusts the focus.[LENS ZOOM] Adjusts the zoom.[POWER] Controls the power status.[SHUTTER] Controls the shutter.[GEOMETRY] Performs geometric adjustment.[CUSTOM MASKING] *1 Performs geometric adjustment using the computer.To use PC-1, PC-2, and PC-3, the optional Upgrade Kit (Model No.: ET-UK20) is required.
