[SECURITY] menuENGLISH - 127 Settings9) Press ◀▶ to switch the item.▶z The setting will change as follows each timeyou press the button.[ENABLE] [DISABLE][ENABLE] Enables button operations.[DISABLE] Disables button operations.▶z The following items are available when [SDI1/2BUTTON] is selected in [INPUT SELECTBUTTON] on PT-DZ21KU or PT-DS20KU.[TOGGLE] Switches between SDI1 and SDI2during button operations.[SDI1] Fixes to SDI1.[SDI2] Fixes to SDI2.[DISABLE] Disables button operations.▶z When [INPUT SELECT BUTTON] is selected inStep 8), press the the [REMOTE CONTROL] screen.10) Press ▲▼ to select [APPLY], andpress the button.▶z The confirmation screen is displayed.11) Press ◀▶ to select [OK], and pressthe button.Notez When a button operation is performed on thedevice set to [DISABLE], the [CONTROL DEVICEPASSWORD] screen is displayed.Enter the control device password.z The [CONTROL DEVICE PASSWORD] screenwill disappear when there is no operation forapproximately ten seconds.z It will not be possible to turn off the power (standbystatus) if the operations of both of [CONTROLPANEL] and [REMOTE CONTROL] are set to[DISABLE].z When the setting has completed, the menu screenwill disappear. To operate continuously, press thez Even when button operation on the remote controlis disabled, the button and the button are enabled.[CONTROL DEVICEPASSWORD CHANGE]The control device password can be changed.1) Press ▲▼ to select [CONTROLDEVICE PASSWORD CHANGE].2) Press the button.▶z The [CONTROL DEVICE PASSWORDCHANGE] screen is displayed.3) Press ▲▼◀▶ to select the text, andpress the button to enter thetext.4) Press ▲▼◀▶ to select [OK], andpress the button.▶z To cancel, select [CANCEL].Attentionz The initial password when used for the first time orafter initializing all the user data is “AAAA”.z Change the password periodically that is hard toguess.
