[DISPLAY OPTION] menuENGLISH - 99 Settings▶■ [INPUT GUIDE]Set whether to display the input guide (input terminalname, signal name, memory number, and [BACKUPINPUT STATUS] currently selected) in the position setin [OSD POSITION].z The setting will change as follows each time youpress the button.[ON] [OFF]▶■ [WARNING MESSAGE]You can set the display/hide of the warning message.z The setting will change as follows each time youpress the button.[ON] [OFF][BACK COLOR]Set the color of the projected image when there is nosignal input.1) Press ▲▼ to select [BACK COLOR].2) Press ◀▶ to switch [BACK COLOR].▶z The setting will change as follows each timeyou press the button.[BLUE] [BLACK][USER LOGO] [DEFAULT LOGO][BLUE] The entire projection area appearsblue.[BLACK] The entire projection area appearsblack.[DEFAULTLOGO] The Panasonic logo is projected.[USERLOGO]The picture registered by the user isprojected.Notez To create the image for [USER LOGO], “LogoTransfer Software” included in the supplied CD-ROM is required.[STARTUP LOGO]Set the logo display when the power is turned on.1) Press ▲▼ to select [STARTUP LOGO].2) Press ◀▶ to switch [STARTUP LOGO].▶z The setting will change as follows each timeyou press the button.[DEFAULTLOGO][USERLOGO] [NONE][DEFAULTLOGO] The Panasonic logo is projected.[USERLOGO]The picture registered by the user isprojected.[NONE] No startup logo is projected.Notez The startup logo will disappear in approximately 15seconds.z To create the image for [USER LOGO], “LogoTransfer Software” included in the supplied CD-ROM is required.[UNIFORMITY]Correct the brightness and color unevenness of theentire screen.1) Press ▲▼ to select [UNIFORMITY].2) Press the button.▶z The [UNIFORMITY] screen is displayed.3) Press ▲▼ to select an item.▶■ To set per color4) Select [WHITE], [RED], [GREEN], and[BLUE] in Step 3).5) Press ◀▶ to switch.▶z Adjust the setting to a value from [–127] to[+127].▶z[VERTICAL]Operation AdjustmentPress ▶ . Deepens upper colors.Press ◀ . Deepens lower colors.▶z[HORIZONTAL]Operation AdjustmentPress ▶ . Deepens colors on the left.Press ◀ . Deepens colors on the right.
