[DISPLAY OPTION] menu94 - ENGLISHSettings[AUTO SETUP]You can set when adjusting a special signal orhorizontally long (16:9, etc.) signal.1) Press ▲▼ to select [AUTO SETUP].2) Press the button.▶z The [AUTO SETUP] screen is displayed.3) Press ▲▼ to select an item.▶■ To set [MODE]4) Select [MODE] in Step 3).5) Press ◀▶ to switch [MODE].▶z The setting will change as follows each timeyou press the button.[DEFAULT] [WIDE] [USER][DEFAULT] Standard setting.[WIDE]Select when an image aspect ratiois a wide-screen signal, which doesnot meet the [DEFAULT] setting.[USER]Select when displaying a signalwith a special horizontal resolution(number of display dots).▶zIf [DEFAULT] or [WIDE] was selected inStep 5)6) Press the button.▶z Automatic adjustment is executed.[PROGRESS] is displayed while automaticallyadjusting. When complete, the system returnsto the [AUTO SETUP] screen.▶zIf [USER] was selected in Step 5)6) Press ▲▼ to select [DISPLAY DOTS],and press ◀▶ to adjust [DISPLAYDOTS] to the horizontal resolution ofthe signal source.7) Press ▲▼ to select [MODE].8) Press the button.▶z Automatic adjustment is executed.[PROGRESS] is displayed while automaticallyadjusting. When complete, the system returnsto the [AUTO SETUP] screen.▶■ To adjust position automatically4) Select [POSITION ADJUST] in Step 3).5) Press ◀▶ to switch [POSITIONADJUST].▶z The setting will change as follows each timeyou press the button.[OFF] [ON][OFF] Does not perform automaticadjustment.[ON] Adjust the screen position and sizewhen auto setup is executed.▶■ To adjust signal levelautomatically4) Select [SIGNAL LEVEL ADJUST] inStep 3).5) Press ◀▶ to switch [SIGNAL LEVELADJUST].▶z The setting will change as follows each timeyou press the button.[OFF] [ON][OFF] Does not perform automaticadjustment.[ON]Adjust black level (on-screen menu[BRIGHTNESS]) and white level (on-screen menu [CONTRAST]) whenauto setup is executed.Notez [SIGNAL LEVEL ADJUST] may not functionproperly unless a still image containing clear blacksand whites is input.[BACKUP INPUT SETTING]Set the backup function that switches the signal to thebackup input signal as seamless as possible wheninput signal is disrupted.1) Press ▲▼ to select [BACKUP INPUTSETTING].2) Press the button.▶z The [BACKUP INPUT SETTING] screen isdisplayed.3) Press ▲▼ to select [BACKUP INPUTMODE].4) Press ◀▶ to switch the item.▶z The items will switch each time you press thebutton.[OFF] Disables the backup function.
