|
15Connecting with wireless LANEasy Wireless Set UpWeak↑↓StrongThere are 3 different connection methods, “S-MAP” (Projector Signal Map) Connection, “1-4/U” Connection, and “PC Search”Connection.These connections enable easy search and connection to the projector.(Refer to “1-4/U” connection on page 19 to establish an easy wireless connection with projectors that have no S-MAP function.)• [S-MAP] Connection: Search and connect to the projectors set up using [Network Number] [S-MAP] (see page 54).Connectable projectors are displayed in order of wireless reception strength. (see page 18).Operation is performed in [S-MAP] or [S-MAP] (list display) view on the window.• [1-4/U] Connection: Search and connect to the projectors set up using [Network Number] [1]-[4] or [USER1]-[USER3].Projectors that can be connected to are displayed in a list (see page 19).Operation is performed in [1-4/U] view on the window.• [PC Search] Connection: Use the [Computer search] function on the projector to search and connect (see page 20).Parts name in search screen0COG2TQLCurrentHB C D E F GCurrent settingsSignal strength levelAA Setting menu displayChoose to display or hide the B to F buttonsB Access Devices (See page 35, 41, 43)When only one projector is connected, select [ ]. Whenmultiple projectors are connected, select [ ].※ Multiple projectors [(Multiple projectors icon)] areavailable when “1-4/U” is selected.C S-MAP (See page 18)Display window – [S-MAP].D 1-4/U (See page 19)Display window – [1-4/U].E PC Search (See page 20)Display window.F Other search (See page 30)From the projectors that are currently switched on, searchfor the projector of specified IP address, domain name,and ID.G Updates the list of found projectors.H Switching Display Window: window – [S-MAP] is displayed.(Upper figure): window – [S-MAP] (list display)is displayed. (See page 16)I Found projectors• Projector found on a wired LAN• Projector found using [U (user)]• Projectors searched by a network number of 1 to 4.J Projectors searched and found by S-MAP.The name and ID of projectors are displayed.represents the projectors that were searched andfound through wired LAN.represents the projectors that were searched andfound through wireless LAN.n window – [S-MAP] (See page 18)ScrollbarIPreparationsMake sure or prepare for the following items:A The wireless LAN adapter is recognized. (See page 73)• The wireless LAN adapter you want to use is enabled. (Otherwise, enable it.)• Make sure the power supply for the wireless LAN adapter is turned on; the hardware switch or the software setting mighthave turned it off.B When using it via the infrastructure connection: Make sure the network setting for the projector has been done by theadministrator. (For detailed information, refer to [USER] setting on page 54.)C If you log in with [User authority], select a projector network number from [USER1] to [USER3]. (For detailed information, referto [USER] setting on page 54.)J
|
