Panasonic PT-F100NT Network Manual

Also see for PT-F100NT: Specifications Dimensions Network Operation Manual Setup and operation manual Spec file

Contents

Panasonic PT-F100NT Network Manual Manual pdf 45 page image

45Useful FunctionsBy using the selective area window, you can specify the necessary information alone from the computer screen, and display iton the projection screen.Check the status indication on the launcher to make sure that transmission ispossible ( ). (See page 33)4Click [Selective Area Transmission] in the launcher menu.The range selection screen is displayed.2Click [ ] on the launcher.The picture in the selective area window is projected.5With the left mouse button held down, surround the area you want tosend to the projector.Selective area window (green) appears on computer screen.You can perform operations in the selective area window with the same operation for moving orchanging the window on the computer screen.• If clicking [ ], automatically determine the size of selected area and enclose it with a framework.• If clicking [ ], the selective area window changes to its default size.• If clicking [ ], the selective area transmission function ends.3Selective Area Transmission• The picture inside the selective area window is displayed as big as possible with keeping the original aspect ratio to be fit forthe resolution of projection screen.• If you use Wireless Manager as a [Standard User] in the [Installation free set up] condition, the selective area transmissionfeature is not available.Quitting selective area transmissionClick [Selective Area Transmission] on the launcher again, or click [ ] on the upper right of the selective area window.Click [ ].The launcher menu will appear.1If you have drawn a straight line, a selective area window is displayed in the diagonal direction from your line.Live ModeSelective Area TransmissionDisplay ChangeVirtual RemoconPointerAV MuteWEB controlSelect Access PortOptionAbout Wireless ManagerEndStart/PauseStop