49You can make various settings related to Wireless Manager ME 5.5.Setting optionsSetting optionsClick [Option] in the launcher menu.The 2Click the desired tab to be set.3Click [OK].4ResolutionSelect the quality of the image transmitted from the computer to the projector.Live Mode Settings•[Remove Image when shutting down Live Mode.]Set this if you want to make images on the projector cleared at the end of live mode.•[Disable Screen Saver]This disables the computer screen saver function while Wireless Manager ME 5.5 is operating. Check this box to disablescreen saver operation during live mode.•[Display sender’s name in Multi Live Mode]The characters (max. 8) which have been entered are displayed at the upper right of the transmitted screen.In the 4-screen and 16-screen index style modes, they are also displayed at the bottom of each image.(Alphanumerics are not displayed when the check mark has been removed.)•[Produce audio along with video during Live Mode]You can set this when you want to output audio data from a projector in live mode.Also, volume setting operated from the launcher is different from the Windows’ volume setting, and it is effective only forwireless connection. When finishing Wireless Manager ME 5.5, the Windows’ volume setting becomes active.Sound can be output only in live mode.•[Start Live Mode at the same time as connection]Projection starts when the connection is made without having to click the live button.TransmissionIn the initial settings, [Disable Screen Saver] is enabled. Please remember that the password protected screen saver is disabledif you need to leave your computer.Click [].The launcher menu will appear.1Live ModeSelective Area TransmissionDisplay ChangeVirtual RemoconPointerAV MuteWEB controlSelect Access PortOptionAbout Wireless ManagerEndStart/PauseStop