Panasonic PT-F200U Operating Instructions Manual

Contents

Panasonic PT-F200U Operating Instructions Manual Manual pdf 22 page image

ENGLISH - 22Basic OperationProjecting an image1. Switch on the connected devices.Press the play button of the required device.2. Press the INPUT SELECT buttons to select therequired input method if needed. See “Switchingthe input signal” on page 24.The image will be projected on the screen.1. Open the Front panel cover.2. Adjust the projected image with the Lens shiftlever. See “Lens shift and positioning” on page 16.3. Adjust the angle of the projector.Screw down the Front leg adjusters and adjust theangle vertically.See “Front leg adjusters and throwing angle” onpage 15.4. Adjust the focus and the projected image size.Turn the Focus lever and Zoom lever to adjust theimage.You can confirm the adjusted effect with the TESTPATTERN in OPTION menu. See “TEST PATTERN”on page 36.Selecting the input signalNOTE:• SIGNAL SEARCH is ON as default and the signal fromthe connected devices is detected automatically. See“SIGNAL SEARCH” on page 35.Positioning the imageNOTE:• Do not touch the Air Exhaust port as this may causeburns or injury.• If keystone distortion occurs, see “KEYSTONE” onpage 32.• If you adjust the focus, you may need to adjust the sizeof the image by moving the Zoom lever again.Focus leverZoom lever