Panasonic PT-F200U Operating Instructions Manual

Contents

Panasonic PT-F200U Operating Instructions Manual Manual pdf 23 page image

ENGLISH - 23 Basic OperationRemote control operationYou can operate the projector with the Remote controlwithin the remote range 15 m (49'2"), approximately ±30° vertically and horizontally.Q Facing to the projectorEnsure the Remote control emitter is facing tothe Remote control signal receptor on front/backof the projector and press the required buttons tooperate.Q Facing to the screenEnsure the Remote control emitter is facing tothe screen and press the required buttons tooperate the projector. The signal will be reflectedoff the screen. The operating range may differ dueto the screen material. This function may not beeffective with a translucent screen.You can adjust the setting of POSITION, DOTCLOCK and CLOCK PHASE in POSITIONmenu automatically for the projectedCOMPUTER signal image.Operating rangeNOTE:• Do not let strong light shine onto the signal receptor.The Remote control may malfunction under stronglight such as fluorescent.• If there are any obstacles between the Remote controland the Remote control signal receptor, the Remotecontrol may not operate correctly.Setting up the image position automaticallyNOTE:• If the dot clock frequency is 108 MHz or higher, AUTOSETUP is not effective.• If the projected image is dark or blurred around theedge, AUTO SETUP may stop the processing beforecomplete. Project a much clearer or lighter image andpress the AUTO SETUP button again.Screen Projected image