ImportantInformationImportant Safety NoticeENGLISH - 3Information on Disposal in other Countries outside the EuropeanThis symbol is only valid in the European Union.If you wish to discard this product, please contact your local authorities or dealer and ask for the correctmethod of disposal.WARNING:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting tocomputers or peripheral devices. Any unauthorized changes or modifications to thisequipment will void the users authority to operate.If you use serial port to connect PC for external control of projector, you must use optionalRS-232C serial interface cable with ferrite core. Any unauthorized changes or modificationsto this equipment will void the user’s authority to operate.FCC RF Exposure Warning: (if provided with wireless device)- This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment.- This equipment has been approved for mobile operation and requires minimum 20 cm spacing be providedbetween antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wirelessmodes of operation.- This equipment may not be used with other installed transmitters, which may be capable of simultaneoustransmission.WARNING:A Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/DataProcessing Equipment, ANSI/NFPA 75.A For permanently connected equipment, a readily accessible disconnect device shall be incorporated in thebuilding installation wiring.A For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easilyaccessible.Declaration of ConformityModel Number: PT-F200NTU / PT-F200UTrade Name: PanasonicResponsible party: Panasonic Corporation of North AmericaAddress: One Panasonic Way, Secaucus, New Jersey 07094Telephone number: (888) 411 - 1996E-mail: projectorsupport@us.panasonic.comThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Thisdevice may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation.