Panasonic PT-F300NTU Operating Instructions Manual

Also see for PTF300NTU - LCD PROJECTOR: Brochure & specs Dimensions Service manual Service manual Network guide

Contents

Panasonic PT-F300NTU Operating Instructions Manual Manual pdf 14 page image

PreparationAbout Your ProjectorENGLISH - 14Remote controlNOTE:• Do not drop the remote control.• Avoid contact with liquids or moisture.• Use manganese batteries or alkaline batteries with the remote control.• Do not attempt to modify or disassemble the remote control. Contact an Authorized Service Center for repairs.• Do not keep pressing the remote control buttons as this may shorten battery life.• Do not point the laser in other people’s eyes or stare into beam.• See “Remote control operation” on page 25.Power buttonWhile the MAIN POWER ison, switch between standbymode and projection mode.(page 21)Project a laser pointer.(page 28)Display the main menu.(page 32)Navigate through themenus with FGIH, andactivate the menu itemwith the ENTER button.(page 32)Capture the projected imageas a frozen picture.(page 27)Reset some of the settingsto the factory defaultsettings. (page 27)Assign the frequently usefunctions from the optionsfor shortcut. (page 27)Control to change the scaleby means of digital zoom.(page 26)Automatically adjust thesetting of SHIFT, DOTCLOCK, CLOCK PHASEand SIGNAL SEARCH forthe projected image of COMPUTER/DVI signal. (page 25)Switch the required inputsignal button to select.Return to the previous menu.(page 32)Turn off the projectiontemporarily. (page 27)Display the frozen imagewhile the display ofsubsequent imagescontinues. (page 27)Control to adjust the volumeof the speaker. (page 29)These buttons are for network control. See the contents of theprovided CD-ROM for instructions. The COMPUTERSEARCH button is for PT-F300NTU only. Battery compartment1. Press the tab and lift up the cover.2. Insert the batteries according to the polarity diagramindicated inside.Attaching a hand strapYou can attach a favoritestrap on to the remotecontrol.Top viewRemote control signalemitters (page 25)Laser pointer beamemitter (page 28)Remote control indicatorPressing any button except the LASERbutton, the remote control indicator willflash. Pressing the LASER button, it willlit.(Shown as PT-F300NTU)