Panasonic PT-F300NTU Operating Instructions Manual

Also see for PTF300NTU - LCD PROJECTOR: Brochure & specs Dimensions Service manual Service manual Network guide

Contents

Panasonic PT-F300NTU Operating Instructions Manual Manual pdf 55 page image

Technical InformationENGLISH - 55 AppendixYou can remotely operate the projector from the outside the remote control range by connecting to the REMOTEterminal.J Pin assignments and signal namesJ LAMP switchingJ Switching input signalsREMOTE terminalPin No. Signal name ContentsA GND GroundB POWER POWER ONC INPUT SEL3 Select input signal 3D NCE INPUT SEL1 Select input signal 1F INPUT SEL2 Select input signal 2G Connect internallyHI ENABLE Control by external contactPin No. SettingsB - A Short OpenOperation On OffPin No. SettingsC - A Open Open Open Short Short OpenE - A Open Short Open Open Short ShortF - A Open Open Short Open Open ShortInput signal COMPUTER1 COMPUTER2 DVI VIDEO S-VIDEO NETWORKNOTE:• When pin A and pin I are short-circulated, the buttons on the projector’s control panel, power and INPUT SELECTbuttons on the remote control cannot be used. In addition, the RS-232C commands and network functions thatcorrespond to these functions cannot be used either.• While pin I is “Open”, do not short-circuit pin A, B, C, E and F. The projector would reject all the signals from theremote control.