Panasonic PT-F300NTU Operating Instructions Manual

Also see for PTF300NTU - LCD PROJECTOR: Brochure & specs Dimensions Service manual Service manual Network guide

Contents

Panasonic PT-F300NTU Operating Instructions Manual Manual pdf 23 page image

Basic OperationSwitching the projector on/offENGLISH - 231. Switch the MAIN POWER on.The power indicator lights up in red.2. Open the front panel cover.This is not necessary in remote control operation.3. Press the power button.The power indicator lights up in green after flashingfor a while.The STARTUP LOGO will be displayed on thescreen. See “STARTUP LOGO” on page 39.1. Open the front panel cover.This is not necessary in remote control operation.2. Press the power button.The confirmation screen is displayed. It willdisappear and return to the projection after10 seconds without any operation.To return to the projection, press any button exceptthe power button.3. Press the power button.The power indicator lights up in orange while coolingthe lamp, then illuminates red when is ready toswitch off the MAIN POWER.4. Switch off the MAIN POWER on the back of theprojector.Switching on the projectorNOTE:• When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for thecharacteristics of the lamp. Those are normal and will not affect the performance of the projector.• When the internal cooling fan is operating, some operational sound may be heard. The loudness of the operational sounddepends on the external temperature.• If you disconnected the power cord or switched off the MAIN POWER while on projecting mode, the projection will startwith connecting the power cord or switching on the MAIN POWER. See “INITIAL START UP” on page 41.Switching off the projectorNOTE:• You can disconnect the power cord or switch off the MAIN POWER instead of following this procedure. See “INITIALSTART UP” on page 41.