Panasonic PT-F300NTU Operating Instructions Manual

Also see for PTF300NTU - LCD PROJECTOR: Brochure & specs Dimensions Service manual Service manual Network guide

Contents

Panasonic PT-F300NTU Operating Instructions Manual Manual pdf 34 page image

SettingsPICTURE menuENGLISH - 34You can adjust the white balance of the projected image.LOW More bluishDEFAULT Balanced whiteHIGH More reddishYou can keep the projected image bright and vivid evenin well-lit rooms where the ambient light sources cannotbe controlled, such as when a door opens or whenwindow coverings fail to block out sunlight.AUTO: Automatic adjustmentON: ActiveOFF: DeactiveYou can improve the vertical resolution of a 2-2 or 2-3pulldown movie. Press I H to select the requiredsetting. (Not available with NETWORK signals)OFF DeactiveON ActiveYou can switch the automatic noise reduction system on/off. Press I H to select the required setting.ON: Automatic noise reductionOFF: No noise reductionWhen the video signal is changed, the setting switchesautomatically. You can switch the setting manually tomatch the video data. Press I H to cycle through theoptions. (Available with S-VIDEO/VIDEO only)The projector will detect the signal from the COMPUTERterminals if the signal is RGB or YP B P R. You can turn offthe automatic detecting system and switch betweenRGB and YP B P R manually.AUTO: Automatic detecting systemRGB: Project as RGB signalYPB PR: Project as YPB PR signalCOLOR TEMPERATUREDAYLIGHT VIEWNOTE:• Do not cover the Ambient Luminance Sensor (ALS) ofthe projector. See “Ambient Luminance Sensor (ALS)”on page 12.• AUTO is not available when INSTALLATION setting inOPTION menu is set to REAR/DESK orREAR/CEILING.DIGITAL CINEMA REALITYNOTE:• Available with 480i, 576i, 1 080/60i and 1 080/50i only.NOISE REDUCTIONNOTE:• Applying noise reduction may affect image quality.TV-SYSTEMAUTOFG FGNTSC SECAMFG FGNTSC 4.43 PAL-NFG FGPAL IH PAL-MNOTE:• AUTO setting will select from NTSC/NTSC 4.43/PAL/PAL60/PAL-M/PAL-N/SECAM.RGB/YP B PRNOTE:• Available with VGA60, 480i, 576i, 480p, 576p,1 080/60i, 1 080/50i, 720/60p, 720/50p, 1 080/60p,1 080/50p only.• When the input signal is not selected correctly withAUTO setting, select RGB or YPB PR manually.